A few points about testing electrics on boilers,the basics | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss A few points about testing electrics on boilers,the basics in the Boilers area at Plumbers Forums

Status
Not open for further replies.
B

Billy Bob Bob

May be useful to some,i once had a nasty bump off a 105 that was on a 3 pin plug,it was unplugged from the wall,the washing machine turned out to be faulty and was earthing through the plumbing and everything connected to it,the 105 got away with just showing a ntc fault,since that incident i have used a volt stick on the case before doing anything tests.jpg
 
lay the back of your hand on the case to see if its live, you wont grab on then :)
 
Status
Not open for further replies.

Similar plumbing topics

    • Like
Mega flow 210i /capacity 195ltr. Was the...
2
Replies
43
Views
9K
  • Question
Yes, The size of the external expansion...
Replies
17
Views
10K
D
Replies
3
Views
2K
C
  • Locked
Oh my giddy aunt! GET A COMPETENT GSR IN...
Replies
1
Views
1K
Dotty
D
  • Locked
Mate, all you need to do is everything, to...
Replies
10
Views
5K
Back
Top