Advise On 40mm Hole for Condensing Boiler.

[Afzal Abrar]

Hi To All..
Could any One Please Advise Which Drill is Best for 40mm Drill through the wall ?
(Not Core Though)..
SDS Drill which can easily drill through up to 40mm..

Thanks in Advance

Regards
Ibby

 

[ShaunCorbs]

sds max

bosch or makita

 

[Afzal Abrar]

Could Please Tell Me The Model Numbers ?
Thanks

 

[ShaunCorbs]

Could Please Tell Me The Model Numbers ?
Thanks

how much you willing to pay as they go anywhere from 250 upto 600 and 110v or 240v

 

[Afzal Abrar]

sds max

bosch or makita

Hi,
Could you Please Let me know the Model Numbers?
Kind Regards
ibby

 

[AlexGas]

Hi,
Could you Please Let me know the Model Numbers?
Kind Regards
ibby

Have look here:

https://www.google.co.uk/search?q=s...-AG0Q_AUIBSgA&dpr=1#q=sds+max++drill&tbm=shop

 

[Afzal Abrar]

how much you willing to pay as they go anywhere from 250 upto 600 and 110v or 240v

Hi ,
Thanks
too be honest can go up to £700 Max..
But have you heard abouit Hilti?

Regards

 

[AlexGas]

Everyone knows HILTI.

 

[Ad_stoke]

Everyone knows HILTI.

Whee have you stashed the cash Alex lol [emoji1]

 

[plumben]

its not always the drill that you need, good quality drill bits will make a massive difference, and stepping up in size will also help, there no point spending between £250-£700 on a drill and then using £10 drill bits

 

[Afzal Abrar]

its not always the drill that you need, good quality drill bits will make a massive difference, and stepping up in size will also help, there no point spending between £250-£700 on a drill and then using £10 drill bits

Hi ,
I heard Hilti are Good But Confused which model shall i go for..
I know i need to spend further 100 - 125 for drill bit

 

[Best]

Look up Hilti Uk for spec on their drills and drill bits.
Hilti state an optimum max diameter for drill bit for each drill, - but the drill will be capable of bigger.
Take a look at T60 or T80 ATC or similar. But they cost plenty. Hilti rep will advise on proper drill and reduced price.
The 'ATC' is an addition to the clutch, it is an electronic safety cut out if the bits jam

 

[Afzal Abrar]

Everyone knows HILTI.

I requested help regarding 40mm Hole not 400mm Lolxxx:biggrin:

 

[Afzal Abrar]

Look up Hilti Uk for spec on their drills and drill bits.
Hilti state an optimum max diameter for drill bit for each drill, - but the drill will be capable of bigger.
Take a look at T60 or T80 ATC or similar. But they cost plenty. Hilti rep will advise on proper drill and reduced price.
The 'ATC' is an addition to the clutch, it is an electronic safety cut out if the bits jam

Thanks Boss...

 

[Best]

Those drills I mentioned are sds max rotary hammers.
Here is a link to video of the smaller T60 ATC drilling with a massive bit. It is perhaps not the best video.
I have same drill
https://m.youtube.com/watch?v=du_yChWri-Y

 

[Afzal Abrar]

Those drills I mentioned are sds max rotary hammers.
Here is a link to video of the smaller T60 ATC drilling with a massive bit. It is perhaps not the best video.
I have same drill
https://m.youtube.com/watch?v=du_yChWri-Y

Yes This One .. The beast

 

[AlexGas]

Wow, the dude in the video has sandals on!?

 

[Best]

Yes This One .. The beast

Here is the link. I see it is for 40mm drill no problem.
Mine is very quiet compared to other brands.
https://www.hilti.co.uk/drilling-and-demolition/combihammers/r4699

 

[Best]

They could be bought used on eBay, if you were happy to take the risk. Likely if the casing and rest of drill shows little abuse, then it might be a good one.