Boiler enable

[march1971dogs]

Hi again think making progress ,could anyone give me a bit advice on the connections on my jguh1 to my boiler
on my boiler i have a boiler connector block it has neutral ,switch live ,live and earth inside it.on my ufh i have two connections labelled boiler enable .the boiler is a windhager biomass boiler with external pump thats wired to boiler any ideas ? The connector block is normally for the thermostat but as you no all the connections are in the ufh wiring centre
peter bon weekend

 

[ShaunCorbs]

get a spark or biomass eng out

 

[snowhead]

If the underfloor wiring centre connections are volt free, then it's boiler Live and switched live to the U.Floor

 

[march1971dogs]

Yes i put meter on the connections both volt free ,does matter which way round the connections to your knowledge
thanks for reply peter