Boiler hanging | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Boiler hanging in the Boilers area at Plumbers Forums

Status
Not open for further replies.
B

buckley plumb

Got to fit a baxi duotec where a balanced flue boiler is. Is there any fire proof covered ply I can mount boiler onto. The house is a dive I don't want to be in there longer than I have to waiting for cement and bricks to set
 
am i missing something? why you putting fire proof ply in most boiler/people use normal 20mm ply
 
If it was me I'd block and foam the old hole. Goes off really quick. Raise the boiler up a tad to get fixings. Core new hole. Bobs your uncle, fannys your aunt!
 
If it was me I'd block and foam the old hole. Goes off really quick. Raise the boiler up a tad to get fixings. Core new hole. Bobs your uncle, fannys your aunt!

I normally do block up. But looking at job the top mounting holes will come right where the hole is and can't raise up as eaves. The house is disgusting dog crap in living room. Want out assp.
 
I normally do block up. But looking at job the top mounting holes will come right where the hole is and can't raise up as eaves. The house is disgusting dog crap in living room. Want out assp.

Go with ply and supalux. Even if baxi are ok with just ply if you're happier covering it then go for it. Shame you aren't down this way I've got sheets of both in the garage.
 
Not what I thought it was then.
 
Good man. I dread the weekly shout of "what's this"
 
Been there got the sordid single t-shirt
 
Got to fit a baxi duotec where a balanced flue boiler is. Is there any fire proof covered ply I can mount boiler onto. The house is a dive I don't want to be in there longer than I have to waiting for cement and bricks to set

When I've had to hang a boiler on ply or timber for one reason or another I've always just used plasterboard over the timber or ply to fireproof it just get a half sheet
 
Thermalite blocks & rapid set cement! You'll be hanging the new boiler in 20 minutes!
 
I have done the ply / fireboard thing, at least that way you can get a fixing on the ply where the old void was
 
Status
Not open for further replies.

Similar plumbing topics

E
It sounds like that needs to be sealed from...
Replies
3
Views
1K
Yeh I agree it needs a clean up, the house has...
Replies
2
Views
714
This response doesn't make any sense, as the...
Replies
23
Views
2K
If this is your model, some of your questions...
Replies
1
Views
573
Hi, thanks for the reply, that did cross my...
Replies
2
Views
821
Back
Top