Boiler Re-pipeing | Boilers | Page 2 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Boiler Re-pipeing in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Hell this is getting highly technical, you lads have lost me and I never thought that would happen, time a get out the bomb calorimeter again, mass gas chromatograph analyser and a pair of 36" stillsons, oh a stop watch and a 12" manometer the later can only be connected to the gas by a GSR so that me out.
 
sorry ermi your wrong there is no suction on the gas pipe work before the valve
if you have a 30kw conventional boiler with20mb inlet and 1 mb of drop on the pipework and you fit another 30k zero govenor boiler you will still have 20mb and 1 mb drop so wheres this suction?if there was a suction effect on the pipework we would need a different set of pipe sizing tables

Try it.
 
I shall record on next undersized . There are a few logics on a 22 mm supply will try and gas rate them . 30kw system boilers 15m ish of tube few bends
 
thats incorrect zero govenor boilers do not pull on the supply if the did we would have had to change our pipe sizing to still have a 1 mb drop personally ive had no updates requiring me to change pipe sizing methods

you have never seen a boiler "pull" the gas from a cooker? term it how you want there stealing gits on poor supplys.
 
in a mates brand new house his hob goes out when the boiler fires on hot wata. So anybody who thinks a "national house builder" does not employee the same cowboys as small frys think again.

infact the bigger the builder the worse the work seems to be from my experience. Ive been on a site this week belonging to the biggest building company i know. The standard of the plumbing is shocking.
 
Last edited:
in a mates brand new house his hob goes out when the boiler fires on hot wata. So anybody who thinks a "national house builder" does not employee the same cowboys as small frys think again.

infact the bigger the builder the worse the work seems to be from my experience. Ive been on a site this week belonging to the biggest building company i know. The standard of the plumbing is shocking.

Suppose thats why the term house bashing was invented. i reckon in 20 years maintenance plumbers will be worked off there feet.
 
Status
Not open for further replies.

Similar plumbing topics

System boilers have a pressurised heating...
Replies
1
Views
274
That's what I was hoping, looks like a good...
Replies
5
Views
942
GREENSTAR CDi CLASSIC Worcester Bosch...
Replies
3
Views
684
Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
800
Any gas boiler's HEX can stand a static head...
Replies
16
Views
1K
Back
Top