Cordless drill replacement | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Cordless drill replacement in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
9
After many years the batteries to my trusted DeWalt have given up.

Bought a new replacement from that place which sells screws, again a DeWalt. Very disappointed with the charge and quality of the product and after half a day the trigger broke.

To be fair it was the cheap end of the DeWalt range DCD776D2SF-GB, but then so was my previous model.

Any recommendations out there, I'm cautious of DeWalt now, and am thinking Makita perhaps?

Cheers
 
I just bought milwaukee and they are the best cordless tools I have ever owned..
the impact driver is ferocious and the same for the drill.. takes your arm off when using a large holesaw. get the fuel gear, brushless motors
 
I use my 18v with an 11/2 dry diamond awesome piece of kit.
 
Milwaukee, (used to be AEG I think). Had two drill for last three years.
Can't fault them.
 
Again another for milwaukee had all the makes over the years and this stuff is the best
 
Just found the receipt for my drill, had it 6 years 2 months used and abused every day of that time, put in new brushes early this year, my only complaint it's a bit heavy and when using 2mm or thereabouts drill bits I have to buy bulk because they tend to break very easily with the weight of the drill.
 
Thing is the OP spent £150 on the Dewalt not £350+ which is what the Milwaukee will cost. For everyday trade use it might be worth spending a bit more...my next stop would be Makita if you're not willing to outlay for Milwaukee.
 
The Metabo seem good deal.
And once you take the initial hit of the cost of a drill or twin kit with 2 or more batteries and a charger, you can then just buy the bare tools for small cost.
Even Hilti have bare tools which include a case, for as little as £130 + vat on deals - like their 22volt cordless combi or impacts for example.
 
It's a cracking drill as well, mines 5yrs old now and we'll abused
 
The Metabo looks great but anything that heavy just reminds me of my old Bosch 24v which was like using breeze block.
 
The Metabo looks great but anything that heavy just reminds me of my old Bosch 24v which was like using breeze block.

That's the only thing I don't like about Metabo and also Hilti combi drill, - very heavy.
Okay for short spells of use, but far too heavy for long use or working above your head.
Panasonic are incredibly lightweight.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
OK, I'm spotting a theme here :) Thanks...
Replies
4
Views
5K
  • Question
Firstly, I love seeing the world through other...
Replies
1
Views
2K
D
  • Question
£199.99
Replies
7
Views
2K
J
  • Locked
I think Aldermaston Tool Company (ATC-The...
2
Replies
25
Views
8K
MarkB
M
S
  • Locked
I think the op gets the hint now. Thread...
Replies
13
Views
5K
Dotty
D
Back
Top