Coring hole for toilet | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Coring hole for toilet in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
910
If coring a hole for a toilet that will connect to the waste via a bent pan connector. What distance for the finnish wall would you core the hole for the 4inch waste pipe. Generally as the toilet isn't on site yet
 
is it a normal toilet nothing special?
 
Most wc pans are 7 1/2 inch to the centre of the outlet from the floor finish.
 
Status
Not open for further replies.

Similar plumbing topics

10 o’clock / 45 degrees would be better than...
Replies
3
Views
606
Well persevered, it is always worth the extra...
Replies
4
Views
963
Was the new pan fitted with a flexible waste...
Replies
1
Views
617
It doesn't matter what plumbing you have...
Replies
5
Views
601
Back
Top