glow worm compact 75e | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss glow worm compact 75e in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
C

cloud

went to the above boiler today. and the boiler was working as it should but the rads were'nt very hot or not warm at all!
the pump was a bit noisey but you could cook a egg on it, it was that hot. and the flow pipe on the boiler was hot. the boiler would just run for a bit and trip off on stat and then fire back up for a bit. can i just add that the pump was spinning inside aswell but no heat was getting around???? thanks
 
Last edited by a moderator:
get a new pump or drop the pump head and clean it up and make sure the bearings are ok if you are happy to do so, and you may not need a new pump for a while longer. According to grunfooss most of their returned failed pumps are just crudded up and a clean solves the problem.
 
Status
Not open for further replies.

Similar plumbing topics

Ignore that air pressure sensor 🤦‍♂️
Replies
5
Views
663
I once had a similar experience with my old...
Replies
6
Views
968
A
Thanks for that. And yes, time for an engineer!
Replies
2
Views
1K
Andy Don
A
Hi Have a Glow worm Flexicom 30cx-Installed...
Replies
0
Views
984
You could try jet flushing it with x400 or...
Replies
9
Views
256
Back
Top