ideal boiler stand off kits

[Mgrant]

Are ideal boiler stand off kits any good? If needing to run pipes up the back of the boiler/

 

[Rickster123]

Yep. It's kinda what they're designed for...

 

[AllyBongo]

Yes, not cheap though! About £90 for the one with the copper pipes

 

[Alpha man]

Just get the stand off kit , the Ideal Independent one is about £5 cheaper than the Logic + one and it's exactly the same!, but only available from Williams.

 

[Stanios]

Get the prepiped version as well save alot of hassle

 

[Roger Welton]

I never bothered with the pre piped ones, expensive bits of copper.

 

[Stanios]

I never bothered with the pre piped ones, expensive bits of copper.

Time is money if you spend half a day messing with it for that £50 extra its a bargain..

 

[Mgrant]

problem with a pre-piped on is all the pipes run up the back of the boiler baring the gas. Which comes from below. Would this be an issue? Also do they do an ideal independent with a built in filling loop. Would save having to tee of the return and the cold as the go up the back of the boiler.

 

[Mgrant]

Check and its just the ideal logic that has a built in loop. Shame as a built in loop and an independent would have saved some time.

 

[anz]

problem with a pre-piped on is all the pipes run up the back of the boiler baring the gas. Which comes from below. Would this be an issue? Also do they do an ideal independent with a built in filling loop. Would save having to tee of the return and the cold as the go up the back of the boiler.

Just take it out.

 

[Mgrant]

Thanks is on a housing estate so every boiler will have the flow return hot and cold supply feed from above. As that worked out the easiest to pipe up/less boxing ins.

 

[Mgrant]

Are the logic and independent the same size/ same pipe positions etc? Just the logic has a built in filling loop and bypass?