Ideal Icos He12 boiler working fine, but no display

[Matt_S]

Hello all. This is my first post, great site by the way. Much credit due to all who offer advice on here.

Not a big problem (i think), but there is no longer any lights or indications showing on the front of the boiler, completely blank. Central heating works fine, as does the hot water. The on/off switch on the front also works, so I think it really is just a display issue. All connections to the pcb and the fuse appear to be sound.

Would it be worth changing the display control unit or is it more likely a pcb issue?

Anyone see any problems with me just leaving it like this?

Thanks for any advice

Matt

 

[Tombarry]

We have the Ideal isar 24 same problem, did think about changing the display but turned out to be the pcb
first one Ideal changed on warranty
then a year later that packed up so got one on ebay £70-£80 approx
best to get it sorted before we all start to freeze again

 

[diamondgas]

Id have thought user display too Matt ... Can only recolect this once or twice in the past but for the love of me don't remember for definite what I replaced ... Nearly sure it was User Display though! Sorry I can't be more specific

 

[nuflia]

I know this post is old, but if we can gain form our members experience it would be great
i have the same issue and then ICOS HE12 stopped working..
no display in the display unit and then after few days it stopped completely.
so what was the problem of yours if yours

 

[Dotty]

Any posts relating to gas, gas appliances, boilers and central heating should be posted in their relevant sections and not in the public domain.

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. http://www.ukplumbersforums.co.uk/im...-gas-engineer/

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competetence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]

notice gas safety related advice