Q
quickie
Boiller seems to be working fine. Cold pressure is 1.1 bar (have external guage fitted)
Any ideas ?
Any ideas ?
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter quickie
- Start date
- Replies 4
- Views 7K
-
- Tags
- boiler
Discuss Intergas boiler flashing 0.0 in the Boilers area at Plumbers Forums
- Status
Q
quickie
Its actually not working on CH now.
Im not familiar with intergas but sounds like low pressure. External gauges and boiler gauges always read different. Could be low pressure due to leak or blocked pressure sensor on boiler. Try topping up pressure until engineer gets there.
D
Dotty
As above. Advising you to check the pressure is as far as we can go.
You need a gsr.
You need a gsr.
- Status
Similar plumbing topics
Check the pressure after running and see if it...
What are engineers opinion on Intergas, I've...
- richard978
- Boilers
- 0
- 576
- Latest:
- richard978
Fits back on flue on top of boiler
Hello,
I have a flexicom.cx that hasn’t been...
pcb issue so gas safe engy required sorry to say
- Worcester Boiler broken
- Boilers
- 1
- 710
- Latest:
- ShaunCorbs
