LPG boiler fitting

[southcoastboile]

Hi, hope someone can answer this. Probably a stupid question.
if you need to cut a gas pipe and re solder on an LPG bulk tank what is the correct method?
on natural gas you are supposed to remove the meter and use cross bonding.
obviously on a bulk tank this is not possible?
thanks

 

[lame plumber]

Id be following a similar process ie disconnecting from the source, capping before working

 

[Linkyplumb]

Disconnect from the valve where it enters the building

 

[Ermintrude]

Do it as per your training! If sounds like you working on LPG and your not qualified to?

 

[southcoastboile]

I am qualified. Have done my LPG change over twice now but have never done any pipe work before.
thanks for advice. Makes sense