Magnaclean versus TF1

[mountainman]

I looked at a job this morning, very nice job too, customer has a Halstead Ace combi that needs replacing.

I'm thinking of fitting a Magnaclean or a Fernox TF1 for the usual reasons. Has anyone an opinion on these units?

Dave

 

[anz]

Why not a Spirotech Spirotrap Magnabooster 3?

SpiroTrap MB3

 

[mountainman]

I only really considered those two because they were the units displayed at my local merchants.

I'm open minded, just would like to use the best unit for the job TBH.

 

[JAP&H]

Originally fitted magnacleans to all replacements. Wasn't happy with the angle they sat at when retro fitting to existing horizontal/vertical pipe work. Air pocket!

Earlier model wouldn't deal with non-magnetic crud so on servicing this had to be cleaned out of the bottom of the pot.

TF1 better IMO, threaded ball type "drain cock" at bottom, drop crud straight into bucket or attach hose with 3/4 bib tap fitting if preferred.

Various seals and washers in box to suit most installation angles. Feedback from customers who have 'emptied' them positive too.

If I run into Fernox rep he will bundle cleanser and inhibitor with filter.

 

[galaxy_plumbing]

Never fitted Spirotrap, but I would go for Magnaclean, depends on space, pipes arrangements etc. TF1 is not bad at all, its just my preference to use magnaclean

 

[Billy Bob Bob]

do a search on here its been debated many,many,many,many,many,times

 

[mountainman]

I've got three to choose from now Gasman, that'll do me, life's too short for a debate.
Thanks All

 

[M.Joshi]

I prefer the MB3 as it is a solid brass body. In terms of choosing between the Magnaclean and TF1, all the plumbers I have spoken to recently seem to prefer the TF1. It is easier for the end user to drain the magnetite/sludge out with the TF1. I think the only thing to be aware of are the different seals depending on the orientation it is fitted in.

 

[SamGas]

Magnaclean all the way!

So long as you have enough space to isolate it/remove the 'inners' to clean and add chemicals then IMO there definately the better option

 

[Destroyer2813]

And if its only a small system you could use one of the mini magna cleans to save space as the TF1 are normally quite bulcky

 

[mountainman]

Must say I that I thought the TF1 a nit bulky.
And being an old git I'm swaying towards brass bodied.

 

[Roger Welton]

I personally prefer the magnaclean as you can have a good look at what they've removed when you clean them.

 

[on31ll]

Magnaclean ! Jut personally prefer them !

 

[mfgs]

TF1, get the installers pack and you get your Fernox F3 and F1 express in with it for an extra £15. Plus its easier to fit on pipework than the magnaclean, easier to clean out and I have not had one leak on me yet unlike a fair few magnacleans.

 

[anth001]

both made by the same company!

 

[mountainman]

Is that good or bad???

 

[REDSAW]

get the cheapest.
more money in the pocket.

 

[Daffy]

both made by the same company!

Thought Adey made Magnaclean & Fernox TF1 ?

 

[paradigm]

Thought Adey made Magnaclean & Fernox TF1 ?

True statement, and magnacleans are by far superior against others - the magnet size is bigger for a start.

 

[mountainman]

Don't really matter anymore cos BG nicked the job off of me.

 

[anz]

True statement, and magnacleans are by far superior against others - the magnet size is bigger for a start.

Yeah but it's getting smaller.

Adey are in the process of reducing the size of the magnets throughout the Magnaclean range.

They say it's to increase the capacity of the container. I think it's cost cutting as the magnet is the most significant cost of the unit.



Sent from my HTC One X using Tapatalk 2

 

[FD Powerflow]

Your bang on Anz, I bought one two weeks ago and when I took it out of the box I couldnt believe they had swapped the big magnet out for something as thin as a pencil, cheeky gits. took it back and demanded an old unit but hargreaves didnt have one.

 

[Heating-eng]

The TF1 is made by Fernox and is much better than the magnaclean.
i have fitted about 60 TF1,s now and I have only had 2 faulty ones.
when we fitted magnacleans we had loads of problems.
the new spirotech mb3 looks quite good but I haven't fitted one yet.

 

[bspareltd]

I am about to launch a new magnetic and non magnetic , similar to magnaclean and fernox tf1 , but cannot think of a good name

 

[Heating-eng]

I am about to launch a new magnetic and non magnetic , similar to magnaclean and fernox tf1 , but cannot think of a good name

Might be an idea to give some of the boys here one and then we can see how good they are.
what price will you be selling them at.