Probably a simple question about an Ideal Esprit HE30 boiler

[Graye]

This is probably a very simple question but I'm struggling for an answer. We have an Ideal Esprit HE30 boiler which has been running fine. We had a new radiator fitted today and I can't get hold of the builder until tomorrow but in the meantime the boiler has gone off and I can't get it to restart. When it tries to fire up the pressure is 0.5. I was able to repressurize our previous boiler with instructions from the manual but this one doesn't actually say how to do it. Would someone please tell me the sequence for turning the taps to fix this please? I would be really grateful if we don't have to spend a cold evening!

 

[Dotty]

Look for a flexible hose beneath your boiler.

Depending on how sadistic your installer was, it may actually be behind a kitchen unit as a past poster discovered once!

 

[erj]

i asume you know where the filling loop is if so trun the vales on does not matter which order when garge reads 1.5 bar turn off and boiler should light

 

[jtsplumbing]

had one a few weeks back , Boiler in kitchen , Filling loop in hall cupboard about 30' away, had to get customer to keep an eye on pressure gauge and shout when done.

 

[Mike Jackson]

and I can't get hold of the builder

Says it all really.

 

[BeckeyBee]

Hi There,

I am new to this site and have an Espirit 2 30 boiler. The boiler has been working fine, we've never had any issues. However the gas ran out today, so we've brought more but the boiler still is not producing any hot water or heating. Anyhow the display screen on the boiler is not coming on, there is no lights on or anything. We've tried ringing technical support however (typically) its not open at this time on a Saturday night! :-( :-(

My partner has changed the fuse in case that was the issue, however its still not working. Can anyone please help?

Thank you

Beckey.

 

[Dotty]

Sorry Beckey, There's not anything else you can do on this, you're going to have to call someone in.

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html