Pumps from an old boiler - connections | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Pumps from an old boiler - connections in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
367
I took out a reasonably new boiler the other day, got a good condition wilo pump in but does not have the standard pump connectors on it, has quick connectors onto annealed copper or summat.
any way to convert these pumps to standard connections?
 
a pic would help as i have no clue by your description
 
Status
Not open for further replies.

Similar plumbing topics

There must be many installations that are in...
Replies
7
Views
922
Turned out to be a dirty flame eye inside the...
Replies
8
Views
706
At the moment when you move the hot water...
Replies
12
Views
1K
Its easy to check for a leak, just tie up the...
Replies
7
Views
1K
A decent water pressure and flow will be...
Replies
4
Views
1K
Back
Top