System Boiler & Unvented Cylinder Install In Leeds - ASAP Start | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss System Boiler & Unvented Cylinder Install In Leeds - ASAP Start in the Boilers area at Plumbers Forums

Status
Not open for further replies.
D

Deleted member 77956

[FONT=Arial, sans-serif]Hi,[/FONT]
[FONT=Arial, sans-serif]
[/FONT]

[FONT=Arial, sans-serif]I have purchased the boiler Viessmann 200-W 35KW and I am quite happy to also buy the radiators, unvented cylinder and filter along with all other materials required.[/FONT]

I am seeking a gas engineer with unvented installation licence that is available to start asap although I can wait up to around 2 weeks.

[FONT=Arial, sans-serif]
[/FONT]

[FONT=Arial, sans-serif]My house is in Leeds LS17

[/FONT]
[FONT=Verdana, sans-serif]
· [FONT=Calibri, sans-serif]Remove & [/FONT]decommission[FONT=Calibri, sans-serif] existing gravity heating system – Gas Boiler, Water Tanks, Existing Radiators and Cylinder. [/FONT][/FONT]

[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· Flush & Clean System.[/FONT]
[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· Install Fernox TF1 Filter & Inhibitors or Adey MagnaClean Professional 22mm Filter).[/FONT]
[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· Install Viessmann 200-W 35KW and Standard Flu in Loft.

[/FONT]

[FONT=Verdana, sans-serif]· Install Unvented Indirect Hot Water Cylinder 250L or 300L in Loft.

[/FONT]

[FONT=Verdana, sans-serif]· Install 15 Double Panel Radiators with TRV's & Lockshields (+ 3 more radiators would be chrome towel radiators).[/FONT]
[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· Install Nest 3[SUP]rd[/SUP] Generation to Heating and Hot Water.[/FONT]
[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· Feeds for Washing Machine & Dryer in garage & for new en-suite – hot cold and waste and connect to existing soil stack.[/FONT]
[FONT=Verdana, sans-serif] [/FONT]
[FONT=Verdana, sans-serif]· All copper pipes, existing coppers can be retain where required, some existing pipes may need to be upgraded to 28mm as boiler is to be placed in the loft. Ensure minimum 22mm piping is in place throughout.[/FONT]

I am also looking for 3 bathrooms and 1 toilet to be fitted afterwards.


[FONT=Arial, sans-serif]Anyone interested send me a private message please.

[/FONT]

[FONT=Arial, sans-serif]Thanks[/FONT]
 
An exciting opportunity for somebody... If you're interested please contact the op directly.
 
OP.

More than one thread on the same subject constitutes spamming, for which you run the risk of being banned.

Don't do it!

Anyone interested in this job will contact you, we've got more than a few members up in that there Yorkshire.
 
Status
Not open for further replies.

Similar plumbing topics

Look at a Viessman 222 10 year manufacturers...
Replies
10
Views
2K
A
Are you sure it’s still vented? Should have...
Replies
1
Views
1K
Deleted member 120897
D
I use a bit of foam to hold it in place, then...
Replies
41
Views
5K
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
👍🏻 I knew the fire ones had to be, we've done...
Replies
10
Views
2K
Back
Top