C
crm
Hello,
could anybody point me in the direction of a supplier either of a NOS seal or a suitable replacement boiler seal ?
The boiler is a Trianco WM 45/60 RS, the seal as I recall it is of a flattened U form, rope type which is fitted over the
pressed steel edge of the burner assembly inner housing, the service manual unfortunately does not seem to include
a part number for this item on the exploded diagram.
It is probably unrealistic to think that a genuine part is still available, however I would be pleased to hear your thoughts
on other potential solutions. I perhaps should add that at this stage the boiler has not failed but each boiler service
increases the chances of the unit being condemned due to a failed seal.
The service / maintenance will of course be performed by a Gas tech but as two professionals have already told me
that the thermocouple cannot be sourced, despite the fact that I found one within 10 minutes,i am not too hopeful
that they would pull out the stops to locate a seal.
Regards
JAR
could anybody point me in the direction of a supplier either of a NOS seal or a suitable replacement boiler seal ?
The boiler is a Trianco WM 45/60 RS, the seal as I recall it is of a flattened U form, rope type which is fitted over the
pressed steel edge of the burner assembly inner housing, the service manual unfortunately does not seem to include
a part number for this item on the exploded diagram.
It is probably unrealistic to think that a genuine part is still available, however I would be pleased to hear your thoughts
on other potential solutions. I perhaps should add that at this stage the boiler has not failed but each boiler service
increases the chances of the unit being condemned due to a failed seal.
The service / maintenance will of course be performed by a Gas tech but as two professionals have already told me
that the thermocouple cannot be sourced, despite the fact that I found one within 10 minutes,i am not too hopeful
that they would pull out the stops to locate a seal.
Regards
JAR