Unvented cylinder and boiler in cellar

[plumber0808]

Hi lads what are my options for this, I'm going to have a look at a job tomorrow where its gravity to sealed system as they are having their loft converted.
I know the condense can be pumped and the prv can be teed back into the system and a separate one fitted and terminated to outside. Is there a suitable pump for the d2 of a unvented cylinder to go into or is it a no go?
The ideal solution would be a pump to terminate the lot into.

There are not many houses with cellars within my work area. I would like to know a bit before I have a look.

thanks

 

[SimonG]

Galvanised tank and a submersible pump suited to the temp of the water.

 

[Killy Bing]

I know of this.


PH-5L-HW - Temperature & Pressure Relief Pump | Pump House

 

[plumber0808]

I know of this.


PH-5L-HW - Temperature & Pressure Relief Pump | Pump House

Have you used one before? Any idea on the price for one.

 

[Killy Bing]

Nope never fitted an unvented ina basement before tbh.

actually im doing one next week for another engineer
wonder how we are doing that one

 

[plumber0808]

I might get lucky and there's a drain down there........... Maybe not.

 

[Masood]

I might get lucky and there's a drain down there........... Maybe not.

Mmmm boiled rats!

 

[Killy Bing]

I have seen a few with a hole cored into the floor for the reliefs...

 

[Ermintrude]

What hole to nowhere?