D
darrenlcy
Hi All,
I have the following questions on the design of central domestic hot water system for one of my ongoing hotel project, this project comprise of 2 area. Area 1 comprise of 6 blocks of hotels each 7 storeys high and area 2 comprise of 6 zones of villas where each zone is made up of about 15 to 20 villas, separate cold and hot water system are provided for two above 2 area. Separate cold and hot water sytem are provided for the above 2 areas:
1. For area 1, if i intended to use reverse return for the hot water return lines, can i do away with balancing valve at the bottom of each hot water return risers (around 12 risers per block )since the system is suppose to be self balancing.
2. For area 2, The current design for the cold water supply is by variable speed pumping from a central water pump room. The hot water to the villas is provided the respective air source heat pump located at each zone. The 6 zones plus the 6 nos of air source heat pumps is served by the same variable speed pumping system. Will there be any issues in the control of the variable speed pumps and do i need to place the balancing valves at the return lines of each villa for balancing purposes.
Thanks.
I have the following questions on the design of central domestic hot water system for one of my ongoing hotel project, this project comprise of 2 area. Area 1 comprise of 6 blocks of hotels each 7 storeys high and area 2 comprise of 6 zones of villas where each zone is made up of about 15 to 20 villas, separate cold and hot water system are provided for two above 2 area. Separate cold and hot water sytem are provided for the above 2 areas:
1. For area 1, if i intended to use reverse return for the hot water return lines, can i do away with balancing valve at the bottom of each hot water return risers (around 12 risers per block )since the system is suppose to be self balancing.
2. For area 2, The current design for the cold water supply is by variable speed pumping from a central water pump room. The hot water to the villas is provided the respective air source heat pump located at each zone. The 6 zones plus the 6 nos of air source heat pumps is served by the same variable speed pumping system. Will there be any issues in the control of the variable speed pumps and do i need to place the balancing valves at the return lines of each villa for balancing purposes.
Thanks.
Last edited by a moderator: