Water flow boost | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Water flow boost in the Bathroom Advice area at Plumbers Forums

M

ma5nasibu

which is the cheapest and most effective way I can get more pressure from my 750ltr tank (situated in the back of my van) via a water hose to a heavy pressure washer. lifting the washer off the van every time is impractical and when in the van gravity is not supplying enough water despite the tank being raised. need a cheep effective pump. but dont know where to start looking for one :confused:
thanks for looking
 
which is the cheapest and most effective way I can get more pressure from my 750ltr tank (situated in the back of my van) via a water hose to a heavy pressure washer. lifting the washer off the van every time is impractical and when in the van gravity is not supplying enough water despite the tank being raised. need a cheep effective pump. but dont know where to start looking for one :confused:
thanks for looking
how much water per minute do you need to feed the washer i think caravan pumps go up to about 12 litres a minute and they run on 12 v electrics youll probably need to wire in a liesure battery via a relay to allow use with out draining the vehicle battery or youll have to keep the van running when using the washer other than that youll need a petrol driven pump
shure and whale are to names that spring to mind google their websites to see if the do larger pumps
i cant see why the tank doesnt feed enough water as i thought preasure washers had a suction effect on the inlet is it possible the feed pipe is to small ?
 
Last edited:
Thanks for the advice,
@CDs, I checked the websites and got a pretty good idea of how best to try and boost the flow.
@stevetheplumber - this particular kasher washer does not have any suction at all, and the pipe was recomended by the washers dealer.
Thanks for the shure and whale website recomendation
Cheers
 

Similar plumbing topics

  • Question
The problem is likely something blocking the...
Replies
15
Views
2K
  • Question
If you have a pressure gauge on the pump...
Replies
8
Views
956
  • Question
How high is the hill 40m as that will add 4...
Replies
2
Views
507
  • Question
Probably all off one main hence your problem...
Replies
3
Views
883
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
1K
Back
Top