Hi,
I am just looking for a little guidance in what my requirements should be for pipe spacing under the screed, my systems specs are as follows:
15mm ultra flex polypipe
poly pipe zru 2/3 manifold pump unit
and plastic egg trays for pipe
S&C screed @ 60/65mm thick, Schulter ditra and 10mm porcelain tile.
If I use 100mm spacing Im guessing I can use lower flow temps? Would this be okay?
The room is a kitchen 28m2 with around 23m2 of floor space.
I'm not 100% on the spacing 100mm or 200mm or even 150mm.
Any help and advice would be thankful.
Sorry if this is in the wrong section.
cheers
I am just looking for a little guidance in what my requirements should be for pipe spacing under the screed, my systems specs are as follows:
15mm ultra flex polypipe
poly pipe zru 2/3 manifold pump unit
and plastic egg trays for pipe
S&C screed @ 60/65mm thick, Schulter ditra and 10mm porcelain tile.
If I use 100mm spacing Im guessing I can use lower flow temps? Would this be okay?
The room is a kitchen 28m2 with around 23m2 of floor space.
I'm not 100% on the spacing 100mm or 200mm or even 150mm.
Any help and advice would be thankful.
Sorry if this is in the wrong section.
cheers
