- Messages
- 5,168
The valve has snapped inside so would like to just get a new tap and use the innards.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter mutley racers
- Start date
- Replies 5
- Views 921
Discuss Can I get new innards for this... in the Plumbing Jobs | The Job-board area at Plumbers Forums
Is that tap head a left-hand thread onto the tap body? If not a left-hand thread, then there's a reasonable chance you can fit the head from a new stopcock.
If it is a left-hand thread, then I'm not going to say you won't be able to use the spindle from a modern tap, but I will call it a long shot. Not aware of where you would get a left-hand taphead from.
Good luck. Let us know how it goes!
If it is a left-hand thread, then I'm not going to say you won't be able to use the spindle from a modern tap, but I will call it a long shot. Not aware of where you would get a left-hand taphead from.
Good luck. Let us know how it goes!
- Messages
- 10,441
Doubt it mate
W
Welder
Personally I'd try the inards from a BS1010 stopcock.
- Messages
- 10,441
It may work but the body looks massively different.
Similar plumbing topics
- Question
Grohe used to be great 50 years ago. In fact...
- UserError
- UK Plumbers Forums
- 5
- 789
- Latest:
- Ric2013
Fluidmaster link
- BananaYogi
- Boilers
- 1
- 688
- Latest:
- ShaunCorbs
-
- Question
Just for future reference, i ordered it...
- Zippymark
- Air Sourced Heat Pumps
- 3
- 2K
- Latest:
- Zippymark
new boiler. fit a baxi. its not repairable
- E Scott
- Central Heating Forum
- 5
- 726
- Latest:
- cjg