Just Need Boiler Identification??? | Boilers | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Just Need Boiler Identification???

Post thread
Post reply

Discuss Just Need Boiler Identification??? in the Boilers area at Plumbers Forums

DjClubber

DjClubber

Gas Engineer
Messages
50
I know this is a Vaillant, does anyone know the actual Model for this please?
2011-12-28_205334_imag0062.jpg
 
I have just done a Gas Safety Inspection on it. But no idea what Model to put down on the CP12 LOL... For the age, good CPA, Flame Picture etc before write it out, want to check correct Gas Rate etc. its burning at 8.9kw net. Just want to confirm against MI...
 
Didn’t you take the case off ?
 
Did you check underneath or ontop where the flue is ?
 
Yes 100% i checked on the top where the flue is. Just a vent nipple and vertical flue, aps also there and exp vessel. NO DB. Underneath just a massive whole no base.
 
According to the master that is a VC 142E or 182E system boiler.
He also said - "That red light indicates ignition PCB, low water, no gas" & "Look at the gauge... it's on ZERO" "Needs water, possible overheat has tripped..."

It is a loverly bit of kit built like a tank & looked after will outlast these modern ones.
 
chris watkins said:
According to the master that is a VC 142E or 182E system boiler.
He also said - "That red light indicates ignition PCB, low water, no gas" & "Look at the gauge... it's on ZERO" "Needs water, possible overheat has tripped..."

It is a loverly bit of kit built like a tank & looked after will outlast these modern ones.
Click to expand...

Absolute DIAMOND... Thats exactly what it is. Just pulled up the MI PDF... Thanks...
 
chris watkins said:
According to the master that is a VC 142E or 182E system boiler.
He also said - "That red light indicates ignition PCB, low water, no gas" & "Look at the gauge... it's on ZERO" "Needs water, possible overheat has tripped..."

It is a loverly bit of kit built like a tank & looked after will outlast these modern ones.
Click to expand...

I rectified all the errors and topped the system back up. Just done a Gas Safety on it, needed to know the Model. Its the VC 112 thermoCompact. TY... Appreciated...
 
Send us your gas safe reg no and I will sort it
 

Similar plumbing topics

B
Toilet fill valve ID please
Not a viva just a cheap one will need to re...
Replies
1
Views
289
ShaunCorbs
ShaunCorbs
Stigster
Does anyone know the name of this model of Roca toilet?
It's the bottom one, floorstanding. It's a...
Replies
2
Views
436
Stigster
Stigster
Z
Vaillant System Boiler With Additional Pump
Hi, thanks for the reply, that did cross my...
Replies
2
Views
820
Zippymark
Z
chloeradhsaw
Two pumps on a heat only boiler quotation
Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
795
ShaunCorbs
ShaunCorbs
A
Problem with Vaillant eco tec boiler
Thanks a lot for your help
Replies
5
Views
415
alanem
A
Back
Top