Salus IT-500 wiring help

Peter Gibbons · Mar 23, 2019

Hi pretty new to this forum so bare with me.
I've fitted these before but only on combi boilers and now I need to fit one on a separate hot water and heating system.
It's the salus it-500 and I have attached my wiring scheme. Just need to know which one goes where on the salus it500 if you are familiar with the set up of them.
Thanks
Peter

ShaunCorbs · Mar 23, 2019

y plan system?

Peter Gibbons · Mar 23, 2019

ShaunCorbs said:
y plan system?

Think so yeah. Would pics of upstairs set up help? A bit unsure of lingo with this set up so your help would be appreciated

ShaunCorbs · Mar 23, 2019

this should do it

Peter Gibbons · Mar 23, 2019

ShaunCorbs said:
this should do it

View attachment 37838

Thanks so do you mean scheme C ?

Can you say from my wiring which wire goes to which... Eg. 1 goes in to C etc

Obviously I get where L and N go. But you have NO and COM and just need to know which wire number on my current setup goes where?

Thanks

ShaunCorbs · Mar 24, 2019

Peter Gibbons said:
Thanks so do you mean scheme C ?

Can you say from my wiring which wire goes to which... Eg. 1 goes in to C etc

Obviously I get where L and N go. But you have NO and COM and just need to know which wire number on my current setup goes where?

Thanks

yes done the wire colours if you see my pic

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
yes done the wire colours if you see my pic

Not quite getting what you mean? :/ Can u exoand?

Harvest Fields · Mar 24, 2019

Peter Gibbons said:
Not quite getting what you mean? :/ Can u exoand?

If you do not get it, then I would suggest it is time to get a professional in mate.

Burger · Mar 24, 2019

Shaun, all of your pics state for Combi boilers, yet OP states it’s not for Combi boilers and for conventional system. My understanding is if it’s the same wiring setup then it should clip onto industry standard backplate?

ShaunCorbs · Mar 24, 2019

C diagram on my pic if you look I’ve put the correct colours in the correct terminals for you see the red yellow and blue lines

Can’t no one see them ???

Burger · Mar 24, 2019

ShaunCorbs said:
C diagram on my pic if you look I’ve put the correct colours in the correct terminals for you see the red yellow and blue lines

Can’t no one see them ???

Yes I can see them, didn’t know you had put them in

it just the wording above states for Combi boiler, didn’t know it was the same for standard systems as well - always learning

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
C diagram on my pic if you look I’ve put the correct colours in the correct terminals for you see the red yellow and blue lines

Can’t no one see them ???

Yea I see it now I think I wasn't looking properly

Ok thanks for this I'll give it a whirl

Is it ok to out the two live and two neutral in to the same one also as it is on my original images?

I note image c is for 2 zone central heating systems so does that account for the separate hot water in the upstairs tanks etc

Thanks

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
C diagram on my pic if you look I’ve put the correct colours in the correct terminals for you see the red yellow and blue lines

Can’t no one see them ???

This is what is upstairs and think there is hot water tank in attic also or water tank of sorts that's feeds CH?

ShaunCorbs · Mar 24, 2019

They should fit

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
They should fit

Ok cool thanks

You're not in North Wales by any chance in case this goes horribly wrong!

So use the same wiring that you sent me above and that will work with the hot water and central heating?

Im gonna go for it if you think it's good to go with

Peter Gibbons · Mar 24, 2019

Did you see the hot water tank pic and still all ok?

Murdoch · Mar 24, 2019

CBW1982 said:
Shaun, all of your pics state for Combi boilers, yet OP states it’s not for Combi boilers and for conventional system. My understanding is if it’s the same wiring setup then it should clip onto industry standard backplate?

That is 100% NOT the case with the device in question ..........

ShaunCorbs · Mar 24, 2019

all it does is replaces your prog so aslong as your system is working now should work once finished

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
all it does is replaces your prog so aslong as your system is working now should work once finished

Thanks

Murdoch · Mar 24, 2019

ShaunCorbs said:
all it does is replaces your prog so aslong as your system is working now should work once finished

Er no ......... it replaces the controller and the room stat

Peter Gibbons · Mar 24, 2019

Murdoch said:
Er no ... it replaces the controller and the room stat

Murdoch are you saying that the wiring set up that Sean suggested is wrong?

ShaunCorbs · Mar 24, 2019

Murdoch said:
Er no ... it replaces the controller and the room stat

True If he has one but that can be addressed or left fully on / max or linked out

Murdoch · Mar 24, 2019

Peter Gibbons said:
Murdoch are you saying that the wiring set up that Sean suggested is wrong?

No ............ but you are not comparing apples with apples

Peter Gibbons · Mar 24, 2019

ShaunCorbs said:
True If he has one but that can be addressed or left fully on / max or linked out

Yeah there is a separate room thermostat in the hallway but the salus has one also on the setup it's a wireless room thermostat

So is wiring still appropriate for this ?

Peter Gibbons · Mar 24, 2019

Murdoch said:
No . but you are not comparing apples with apples

What do you suggest would be different to the setup I have?

Salus IT-500 wiring help

Peter Gibbons

ShaunCorbs

Super Moderator

Peter Gibbons

ShaunCorbs

Super Moderator

Peter Gibbons

ShaunCorbs

Super Moderator

Peter Gibbons

Harvest Fields

Burger

ShaunCorbs

Super Moderator

Burger

Peter Gibbons

Peter Gibbons

ShaunCorbs

Super Moderator

Peter Gibbons

Peter Gibbons

Murdoch

ShaunCorbs

Super Moderator

Peter Gibbons

Murdoch

Peter Gibbons

ShaunCorbs

Super Moderator

Murdoch

Peter Gibbons

Peter Gibbons

Similar plumbing topics