D
Deleted member 102951
Hi
I have an installation for CH half way installed (first fixed)
I want to tile all the floors.. and have realised it will be too cold so I thought about laying pipes in the floors instead of having radiators and simply using the flows and returns that are already there for the radiators to simply connect the pipes
Is this feasible? (attached is floor plan and below are the sqm sizes of each room)
Its a ground floor / concrete uninsulated / finished in tiles
Many thanks
legepe
SQM = HEATING / SQM = TOTAL FLOOR SPACE - excluding ie cupboard/bath etc
Kitchen 12 / 20
Lounge 8 / 16
Bed 5 / 9.3
Bath 2 / 2.5
Hall 5
I have an installation for CH half way installed (first fixed)
I want to tile all the floors.. and have realised it will be too cold so I thought about laying pipes in the floors instead of having radiators and simply using the flows and returns that are already there for the radiators to simply connect the pipes
Is this feasible? (attached is floor plan and below are the sqm sizes of each room)
Its a ground floor / concrete uninsulated / finished in tiles
Many thanks
legepe
SQM = HEATING / SQM = TOTAL FLOOR SPACE - excluding ie cupboard/bath etc
Kitchen 12 / 20
Lounge 8 / 16
Bed 5 / 9.3
Bath 2 / 2.5
Hall 5