- Messages
- 7
I need to stop the dripping from the cold side of the unit. The tap goes from full on to off in half a turn so I assume it has a ceramic valve. Normally you prise the cap off, however there seems no gap at all and a knife will not locate a gap. Here is a photo
https://photos.app.goo.gl/Nvq4t8nJaSZqe8rf7
Next I tried unscrewing the lever handle and the double ended threaded rod that fixes it into the moving part of the tap. Photo
https://photos.app.goo.gl/tGvmgZEK3fbkRp4C6
Then I tried easing off the moving part of the tap, hoping that the threaded rod that was removed was securing it. Photo
https://photos.app.goo.gl/ULeYC1dTr9TQTxX68
That didn't work either. Can anybody help me get this tap dismantled? Thanks
https://photos.app.goo.gl/Nvq4t8nJaSZqe8rf7
Next I tried unscrewing the lever handle and the double ended threaded rod that fixes it into the moving part of the tap. Photo
https://photos.app.goo.gl/tGvmgZEK3fbkRp4C6
Then I tried easing off the moving part of the tap, hoping that the threaded rod that was removed was securing it. Photo
https://photos.app.goo.gl/ULeYC1dTr9TQTxX68
That didn't work either. Can anybody help me get this tap dismantled? Thanks