which fitting? radiator 15mm pipe to central heating valve | Central Heating Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

which fitting? radiator 15mm pipe to central heating valve

Post thread
Post reply

Discuss which fitting? radiator 15mm pipe to central heating valve in the Central Heating Forum area at Plumbers Forums

P

polyal

Messages
4
HI!
i am a new member and only a DIY'er
i have had to replace a radiator with a smaller one
i need to extend the outlet of the radiator by 6" using
15mm copper pipe...what fitting do i use to connect
the pipe to the system valve (which has the original radiator fitting connected )
regards
 
any pics of the valve you need to go onto
 
upload a file right of post reply
 
polyal said:
yes but how do i upload it
Click to expand...

pic3.jpg
 
best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.NoLinkingToThis/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.NoLinkingToThis/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome
 
ShaunCorbs said:
upload a file right of post reply
Click to expand...
ShaunCorbs said:
best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.NoLinkingToThis/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.NoLinkingToThis/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.NoLinkingToThis/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome
Click to expand...
thanks very much will check it out♪♪
 

Similar plumbing topics

M
Y Plan central heating gets hot on hot water demand
Sometimes the connection point of the cylinder...
Replies
3
Views
557
Last Plumber
Last Plumber
B
Replace central heating gate valve with 2-port valve
In the end decided to follow Chuck’s advice...
Replies
11
Views
675
Barnjet
B
K
Converting single to two pipe system
Thanks for letting us know.
Replies
8
Views
2K
Last Plumber
Last Plumber
rwb196884
Replacing one central heating radiator with two
Fit one radiator, correctly sized to heat the...
Replies
7
Views
492
snowhead
snowhead
B
What do you think of this price for fitting gas-fired central heating?
Although the forum doesn't generally comment...
Replies
5
Views
546
gmartine
gmartine
Back
Top