Lever tap with H & C feed changed to Non Concussive. Is a TMV required | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Lever tap with H & C feed changed to Non Concussive. Is a TMV required

Post thread
Post reply

Discuss Lever tap with H & C feed changed to Non Concussive. Is a TMV required in the Plumbing Jobs | The Job-board area at Plumbers Forums

J murton

J murton

Messages
86
Hello

We have 3 lever taps that need to be changed to Non Concussive for the customer.

The hot feet is from a small water heater and cold off the mains I think.

The Non Concussive Tao obviously only has one feed into it.

So my question is do I need to no fit a tmv to mix both hot and cold or could I just turn the heat down on the water heater and connect just the hot.

Thank
 
If you turned the hot water heater down to a safe temperature for the tap, you'd have to have the stored hot water at 38 / 40 c,

Does that stored hot water temperture ring any bells?
 
Come across a problem.
Any suggestions would be appreciated o_O. The original tap has a larger base. We now have some gaps.

EF93A7EF-DE48-4453-8BD4-1A075E3AC3D8.jpeg


0CDB71D9-5615-44A2-AEED-0F88C9666F42.jpeg
 
Stainless steel repair washer
 

Similar plumbing topics

Stigster
Non-concussive taps, an "argument" with a colleague
To all those who contributed here, thank you...
Replies
10
Views
158
Stigster
Stigster
Stuartpm
  • Question
Straight valve to turn shower on & off (you'd think this would exist)
How about an ir sensor with a solenoid waive...
Replies
7
Views
845
ShaunCorbs
ShaunCorbs
S
  • Question
Low pressure mixer spray tap recommendations ?
Thankyou, I have already installed a hot and...
Replies
13
Views
836
Splitty
S
N
  • Question
Is this changed domestic hot water system design going to work ok?
Yes that would work in my opinion not a expert...
Replies
1
Views
806
king of pipes
king of pipes
B
  • Question
Bi Flow dual taps query
I believe a dual flow tap does not require non...
Replies
3
Views
899
Basher
B
Back
Top