I installed a new toilet fill valve a few months back, it came with a plastic tube to connect to the tiny hole and I figured that's how it must fill. Looking at my other toilet after it had a problem, no water comes from the hole at the top at all and there's no plastic tube there. So I feel maybe this one is faulty somehow, even though it seem to do the job?? I'll attach a pic of the tube it's coming from. Fingers pointing at it. Thanks in advance.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Toilet fill valve filling from tiny hole near the top? in the Boilers area at Plumbers Forums
B
Burger
What brand of inlet valve?
- Messages
- 8,627
Its ok mate it doesn’t fill from there , you may get a small amount of water coming down it as the valve operates , no problem its just its design
Similar plumbing topics
Yeah I think there was loose wiring in the...
You'd have to have gas meter removed if you...
Good job buddy.
Rather than a beer, if you’re...
