Worcester cdi service...

A

Aire

• Sep 4, 2019

• #1

Hi guys, got a Worcester greenstar 30cdi to service, I checked it last year and fan pressure was with acceptable limits but boilers 5 years old thos year so will need burner cleaning out. Am I right in thinking you need a special brush as well as a burner gasket or is it just the gasket I need? Thanks

 

townfanjon

Esteemed

Plumber

Gas Engineer

Subscribed

Messages

8,627

• Sep 4, 2019

• #2

I dont do Worcester Craig but do remember from years ago that you buy a kit which contains a brush etc .

 

ShaunCorbs

Super Moderator

Staff member

S. Mod

Plumber

Gas Engineer

Subscribed

Messages

34,702

Solutions

1

• Sep 4, 2019

• #3

Yes best to around £30 for the seal and gasket

Plus another £10-£20 for the top gasket

Also electrodes

 

Attachments

• 
  E57EF034-691A-4B1C-A6B0-3FFF3D58F4C1.jpeg

  1.7 MB · Views: 28

A

Aire

• Sep 4, 2019

• #4

Thanks chaps, never serviced a Worcester before so thought I'd double check. Is the top seal and front seal seperate items then, don't they sell a kit that comes with both and the brush kit?

 

ShaunCorbs

Super Moderator

Staff member

S. Mod

Plumber

Gas Engineer

Subscribed

Messages

34,702

Solutions

1

• Sep 4, 2019

• #5

Craig Watson said:

Thanks chaps, never serviced a Worcester before so thought I'd double check. Is the top seal and front seal seperate items then, don't they sell a kit that comes with both and the brush kit?

Click to expand...

Brush and front seal eg the door will come as one

Top seal is separate

Also electrodes are Separate

 

A

Aire

• Sep 4, 2019

• #6

ShaunCorbs said:

Brush and front seal eg the door will come as one

Top seal is separate

Also electrodes are Separate

Click to expand...

Ok thanks, how likely is it the electrodes will need changing?

 

Gasmk1

Esteemed

Gas Engineer

Messages

2,155

• Sep 4, 2019

• #7

if never changed before i would say highly likely

 

ShaunCorbs

Super Moderator

Staff member

S. Mod

Plumber

Gas Engineer

Subscribed

Messages

34,702

Solutions

1

• Sep 4, 2019

• #8

Craig Watson said:

Ok thanks, how likely is it the electrodes will need changing?

Click to expand...

Highly normally last around 5 years max (pic was 6 and giving ea lockout once and a while)

You can also do the bearning plate if it hasn’t been done

 

Attachments

• 
  4F2BBC05-E9A1-4AAC-8A80-D0F95BA1618E.jpeg

  1.4 MB · Views: 26

A

Aire

• Sep 4, 2019

• #9

Ok then, so gasket, top seal, brushes and electrodes it is then. It's the tilers boiler who does our bathrooms, he's a moaning f**ker at the best of times so I'm sure he'll be thrilled when I tell him the price

 

Harvest Fields

Esteemed

Plumber

Gas Engineer

Subscribed

Messages

10,441

• Sep 4, 2019

• #10

You can not put a price on safety mate.

 

ShaunCorbs

Super Moderator

Staff member

S. Mod

Plumber

Gas Engineer

Subscribed

Messages

34,702

Solutions

1

• Sep 4, 2019

• #11

TBH around £150 coves is ish

 

A

Aire

• Sep 4, 2019

• #12

Yeah looking around £80 for parts and should allow 2 hours labour as I've not done one before so don't need to be rushing.

 

A

Allgoode

Gas Engineer

Messages

285

• Sep 6, 2019

• #13

He will soon moan if you don't strip & then it goes **** up in the middle of the winter.
Do it once & do it properly.
He can then start saving for the next time it reqs a major strip/service out if boiler lasts that long.
Best to change the bearing plate also because it usually takes the fan out if one of the flaps separates & goes through.
Cheers,
Andy

 

A

Aire

• Sep 11, 2019

• #14

Serviced boiler today, went well for my first one, turns out boilers actually 7 years old and the electrodes were in bad condition so definitely needed replacing. Tiler didn't flinch at the price either. Cheers for the help guys.

 

A

Allgoode

Gas Engineer

Messages

285

• Sep 17, 2019

• #15

he's obviously earning too much then