Drayton SM2 how to use. | Central Heating Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Drayton SM2 how to use. in the Central Heating Forum area at Plumbers Forums

Messages
13
Hi,

I've recently moved into the new flat and can't figure out how to use the central heating. It's a Vaillant Iboiker with Drayton SM2 'programmer. I' ve read the instructions but for some reason the central heating does not work, we still get the hot water all the time though. If i want the heating to be set at 4:30am and 5:00pm once a day how should I set it? I use the tappets according to the manual bimut nothing happens. Another question is how to just turn it on when you wabt it to go in straight away without the timer? I believe it's the advance button. The led indicates the heating is on but heaters are stone cold.


Cheers

Matt
[automerge]1583817992[/automerge]
 

Attachments

  • 302068_wl.jpg
    302068_wl.jpg
    29.1 KB · Views: 61
Two times a day use the twice setting with your times set via the pegs

one time a day eg just in the morning use the once setting

24 hours is constant
 
Will give it a go tonight, at the moment is set at 20 degrees.
[automerge]1583862049[/automerge]
I've put it all the way down untikk it clicked at 12 digress abd set it up at 27. Tiner is in 24h and still nothing.
 
Last edited:
So ch on 24 hours
Room stat up past 25 dc

boiler should fire do you hear the pump running ?
 
No it doesn't. No sound at all.
[automerge]1583864030[/automerge]
 

Attachments

  • 20200310_181024.jpg
    20200310_181024.jpg
    53.7 KB · Views: 40
  • 20200310_181034.jpg
    20200310_181034.jpg
    50.8 KB · Views: 32
  • 20200310_181041.jpg
    20200310_181041.jpg
    43.8 KB · Views: 35
  • 20200310_181052.jpg
    20200310_181052.jpg
    75.9 KB · Views: 37
Last edited:
Light isn’t on at the timer when it’s on 24 so bad timer I would say
 
If this is a new build flat, you have redress with the building company contact them and get them to sort it out. This will be under the guarantee.
 

Similar plumbing topics

Sometimes the connection point of the cylinder...
Replies
3
Views
633
A few decades ago, on-off control with a wide...
Replies
8
Views
687
L
Replies
2
Views
2K
Hi, I am trying to link a Hive heating & hot...
Replies
0
Views
646
Hi d36csr. You aren't a bicycle plumber are...
Replies
11
Views
4K
Back
Top