En-suite shower room refurb needed in Twyford RG10, Berkshire before end January (overall dimensions: 335 x 157cm)
————————————
• Remove existing corner shower cubicle and fit new larger 1500mm full-width doors, low profile 1500 x 900 resin tray and replace old Triton Ivory II 8.5kw electric shower with new similar
• Refit existing folding shower seat. Fit new in-cubicle shelf unit, soap dispenser and hooks
• Remove wash basin and vanity unit and replace with new 1200 x 400 ‘floating' wash basin
• Remove existing close coupled WC and replace with new close-coupled WC
• Add touchless flush kit to WC
• Remove existing long vanity unit and replace with smaller wall-hung vanity/storage unit
• Remove existing extractor fan and make good wall
• Remove existing electric towel radiator and replace with PIR wall or ceiling light
• Replace existing radiator with new tall wall-hung radiator/towel rail
• Slightly relocate wall mirror with integral shaver point to avoid new shower cubicle;
• Remove wooden door to en-suite to make open plan
• Remove bathroom curtain and pelmet and make good
• Clad shower and basin walls with adhesive PVC cladding panels on top of existing tiles
• Remaining walls and woodwork to be painted by decorator;
None of the above fittings has been purchased yet and I am open to persuasion re my choices. Unless you can obtain these items more cheaply than I can, I will order as soon as I have a firm installation date.
You’re welcome to come and take a look but it’s a bit of a bomb site up there as I had a roof leak in the walk-in wardrobe which has only just dried out.
Thanks,
Simon
————————————
• Remove existing corner shower cubicle and fit new larger 1500mm full-width doors, low profile 1500 x 900 resin tray and replace old Triton Ivory II 8.5kw electric shower with new similar
• Refit existing folding shower seat. Fit new in-cubicle shelf unit, soap dispenser and hooks
• Remove wash basin and vanity unit and replace with new 1200 x 400 ‘floating' wash basin
• Remove existing close coupled WC and replace with new close-coupled WC
• Add touchless flush kit to WC
• Remove existing long vanity unit and replace with smaller wall-hung vanity/storage unit
• Remove existing extractor fan and make good wall
• Remove existing electric towel radiator and replace with PIR wall or ceiling light
• Replace existing radiator with new tall wall-hung radiator/towel rail
• Slightly relocate wall mirror with integral shaver point to avoid new shower cubicle;
• Remove wooden door to en-suite to make open plan
• Remove bathroom curtain and pelmet and make good
• Clad shower and basin walls with adhesive PVC cladding panels on top of existing tiles
• Remaining walls and woodwork to be painted by decorator;
None of the above fittings has been purchased yet and I am open to persuasion re my choices. Unless you can obtain these items more cheaply than I can, I will order as soon as I have a firm installation date.
You’re welcome to come and take a look but it’s a bit of a bomb site up there as I had a roof leak in the walk-in wardrobe which has only just dried out.
Thanks,
Simon