Hi I am wondering if anyone can give me some advice/help with this issue.
I have a Worcester Greenstar 30i ErP which got it's first yearly service by B/Gas 2 days ago.
The boiler was working fine prior to the service, and seemed to work o.k yesterday, this morning the radiators went cold despite the thermostat being at 22 when I investigated I noticed that the pressure had fallen to about half a bar. The hot water was working , I took the bottom drip tray out and I noticed that there was some water in the tray, I emptied it and used the tool to put the pressure back up to 1.2 (which is has sat at happily since installation) and tried the heating again. The boiler seems to function as it should but the radiators stay cold. I reset the unit which puts it in to test mode for around 15 mins, during this test the heating comes on but the radiators lose heat and eventually go cold. I have a Hive thermostat which controls the heating, I have replaced the batteries, reset the connection and hooked it all back up to my phone,
I have set the temperature to Max, the boilers blue light is on, there is a flame indicator on the panel, but no heat from radiators, I am on B/Gas Homeserve, but they cannot get anyone out until Thursday - anyone any ideas ?
I have a Worcester Greenstar 30i ErP which got it's first yearly service by B/Gas 2 days ago.
The boiler was working fine prior to the service, and seemed to work o.k yesterday, this morning the radiators went cold despite the thermostat being at 22 when I investigated I noticed that the pressure had fallen to about half a bar. The hot water was working , I took the bottom drip tray out and I noticed that there was some water in the tray, I emptied it and used the tool to put the pressure back up to 1.2 (which is has sat at happily since installation) and tried the heating again. The boiler seems to function as it should but the radiators stay cold. I reset the unit which puts it in to test mode for around 15 mins, during this test the heating comes on but the radiators lose heat and eventually go cold. I have a Hive thermostat which controls the heating, I have replaced the batteries, reset the connection and hooked it all back up to my phone,
I have set the temperature to Max, the boilers blue light is on, there is a flame indicator on the panel, but no heat from radiators, I am on B/Gas Homeserve, but they cannot get anyone out until Thursday - anyone any ideas ?