Hot water only lasts 2 - 3 minutes before slowly dropping to cold. | General DIY Plumbing Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Hot water only lasts 2 - 3 minutes before slowly dropping to cold.

Post thread
Post reply

Discuss Hot water only lasts 2 - 3 minutes before slowly dropping to cold. in the General DIY Plumbing Forum area at Plumbers Forums

D

Diyer171

Messages
21
Hi all,

Hot water only lasts 2 - 3 minutes, if I turn it off for a minute hot water returns for a couple more minutes. It seems to last longer on a lower pressure. We had a plumber change the heat exchanger which didn’t make a difference. And it’s not the thermal mixer in the shower as we had that changed too. It happens on all hot taps but really only affects us in the shower. The boiler is a 17 year old Valliant Ecomax combi so I’m thinking that it’s probably just time to replace the boiler but would rather not spend that sort of dosh if there is an easy fix. I have also flushed the system twice with sentinel cleaner which might have made a small difference. But our radiators are hot so I’m confused why replacing the heat exchanger didn’t make a difference. As a side note there have been a few days where the ignition flame didn’t come on automatically and we needed to press button to ignite but I wonder it that might be linked in any way.

thanks in advance for any advice.
 
Sort by date Sort by votes
Diyer171 said:
I’m confused why replacing the heat exchanger didn’t make a difference.
Click to expand...
Heat exchanger would not be my diagnosis for the symptoms you describe. AIUI, we're not allowed to discuss boiler repairs on this forum for 'legal reasons' but a heating engineer should be able to fix the problem without difficulty.

Personaly, I would think twice about spending any money on repairing a 17 year old combi. This is particularly the case if it's a reasonable time to have a replacement installed. But you should discuss the repair / replace decision with your engineer.
 
Upvote 0 Downvote
I think we can discuss to a point, now this is an international forum?

Which boiler heat exchanger was replaced, out of interest? There are two in a combi boiler so I assume you are referring to one of these. If you don't know, this is a discussion you need to have with the gas installer that repaired the boiler and who, really, should be able to disgnose the fault.
 
Upvote 0 Downvote
Ric2013 said:
I think we can discuss to a point, now this is an international forum?

Which boiler heat exchanger was replaced, out of interest? There are two in a combi boiler so I assume you are referring to one of these. If you don't know, this is a discussion you need to have with the gas installer that repaired the boiler and who, really, should be able to disgnose the fault.
Click to expand...
It was the DHW, from my understanding if it’s the main heat exchanger you might as well replace the whole boiler.
 

Attachments

  • 88BDD947-984A-4AE5-9FDE-A982F24D739E.png
    88BDD947-984A-4AE5-9FDE-A982F24D739E.png
    466.2 KB · Views: 24
Upvote 0 Downvote
Ric2013 said:
I think we can discuss to a point, now this is an international forum?

Which boiler heat exchanger was replaced, out of interest? There are two in a combi boiler so I assume you are referring to one of these. If you don't know, this is a discussion you need to have with the gas installer that repaired the boiler and who, really, should be able to disgnose the fault.
Click to expand...
Chuck said:
Heat exchanger would not be my diagnosis for the symptoms you describe. AIUI, we're not allowed to discuss boiler repairs on this forum for 'legal reasons' but a heating engineer should be able to fix the problem without difficulty.

Personaly, I would think twice about spending any money on repairing a 17 year old combi. This is particularly the case if it's a reasonable time to have a replacement installed. But you should discuss the repair / replace decision with your engineer.
Click to expand...
Thanks for your reply, we are going to be moving house by the end of the year so I would really rather a quick fix if there is one.
 
Upvote 0 Downvote
At that very small flowrate a 25kw boiler will maintain a temp of 65C (from mains at 7C) maybe boiler not modulating and this is the over temp limit and burner is switching off then back in again when the temp falls, open another hot tap to increase the flowrate and see if it still runs hot/cold. Will need RGI one way or the other anyhow except you can see something obvious external to the boiler to cause this very low flow rate which the boiler should still be able to handle by modulation.
 
Upvote 0 Downvote

Similar plumbing topics

C
  • Question
Noisy main cold water pipe, my plumber hasn't heard this before.
I had a chattering float valve in the loft...
Replies
2
Views
326
Jerry
J
J
  • Question
Hot water running cold
Hi all Hope you can help We have a Gloworm...
Replies
0
Views
644
JAY123
J
F
  • Question
Hot water decreases flow after 5 minutes (electrical)
That's not what I meant. Are the hot and cold...
Replies
6
Views
1K
Chuck
C
T
  • Question
Loft conversion hot water problem
When this happened, I assume that the bathroom...
Replies
10
Views
1K
Timmy D
T
R
  • Question
Hot water coming on combi sometimes other times not
Thanks
Replies
3
Views
1K
Robert Anderson
R
Back
Top