- Messages
- 3
Hello. I'm removing a sink temporarily to have flooring fitted. The pipe isn't fitted with a ball valve to isolate at the pipe. The flexi pipe connector is a 10mm connection (not a 15mm) and I am really struggling to find something that will blank this off at the pipe (it's a 'male' fitting with the threads on the outside). I can find loads of 15mm blanks, but not something to fit a 10mm screw. The flexi pipe connector is fairly new and is also 10mm (although I cannot find any 10mm flexis online either?). Is there a solution to temporarily blank off the pipes so the water can stay on while the flooring is getting fitted. I even considered taking the tap off the sink and suspending that and just removing the physical sink..