Connector for combined bath overflow and supply

Tom Crowley · Nov 4, 2021

I need advice on a water inlet pipe for a combined bath overflow and supply. I have uploaded photos. On one side is the attachment i need. In the attached pics one side of the fitting has the connector I need. It's missing from other side. Also how do you remove the fitting on left side? Looks like a radiator tail spanner

snowhead · Nov 4, 2021

I'd say hold the plug with a hex wrench then unscrew the chrome ring

Tom Crowley · Nov 5, 2021

Tom Crowley said:
I need advice on a water inlet pipe for a combined bath overflow and supply. I have uploaded photos. On one side is the attachment i need. In the attached pics one side of the fitting has the connector I need. It's missing from other side. Also how do you remove the fitting on left side? Looks like a radiator tail spanner

Silly me. Turns out hot and cold inputs are linked via a tee piece and then single mixed input enters the fitting on the right.
Forgettaboudit

Ben-gee · Nov 5, 2021

Yes it’s fed by a blended supply.

But you should be able to swap it to the left side if you want to, just choose the side which will be most accessible in the future once the bath is in place.

Welcome to PlumbersTalk.net

American Visitor?

Connector for combined bath overflow and supply

Tom Crowley

Attachments

snowhead

Tom Crowley

Ben-gee

Similar plumbing topics