Mixer tap identification | Bathroom Advice | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Mixer tap identification

Post thread
Post reply

Discuss Mixer tap identification in the Bathroom Advice area at Plumbers Forums

G

Greyman

Messages
2
Hi all,

Can anybody identify the manufacturer and model of my bath mixer tap with shower attachment.
The tap head pulls off and there is no grub screw - interference fit I believe.
My best bet is that it is about 15 years old. It's a quarter turn and leaking on the cold side so I need to source
the correct cartridge.

Thanks
 

Attachments

  • 20220110_121645.jpg
    20220110_121645.jpg
    403.6 KB · Views: 39
  • 20220110_121627.jpg
    20220110_121627.jpg
    321.6 KB · Views: 32
Sort by date Sort by votes
If you don't have any paperwork that came with it, and no-one can identify it, you can still establish the correct replacement.

Turn the water off, remove the cartridge, measure the critical dimensions (including the number of splines under that black plastic cap that holds on the tap head), do a sketch with the numbers on, and put the old cartridge back for the time being.
Ideally you need to use vernier calipers to take the measurements.

4F92E771-8A61-4B8A-8852-BE9E62CE7996.jpeg
(In your case I think G=0)

Then you can research the options for replacing it from the measurements you've taken.
If unsure, try 🤪 :
 
Last edited:
Upvote 0 Downvote

Similar plumbing topics

J
  • Question
Unable to remove lever on Grohe basin mixer tap
I find it’s often helpful to tap the handle...
Replies
15
Views
3K
Ben-gee
B
M
  • Question
Pipe fittings type for mixer tap
Marley Equator Demount tool in 15mm seem to be...
Replies
3
Views
758
snowhead
snowhead
H
  • Question
Replacing Cooke & Lewis RICCI bath mixer cartridge - no grub screw
If there are no grubs screws it will just pull...
Replies
1
Views
845
Ben-gee
B
I
  • Question
Leaking Bath Mixer Tap
It doesn’t appear you’ve missed anything...
Replies
1
Views
1K
Deleted member 120897
D
G
  • Question
Bath mixer tap identification
Maybe grohe
Replies
1
Views
1K
ShaunCorbs
ShaunCorbs
Back
Top