Vaillant Controls VRC470F | Central Heating Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Vaillant Controls VRC470F

Post thread
Post reply

Discuss Vaillant Controls VRC470F in the Central Heating Forum area at Plumbers Forums

R

rgregson23

Messages
9
I have a Vaillant Ecotec plus 630 and a VRC 470F Controller. The controller has a radio receiver in the boiler facia.
Now I have a Sensohome controller to install with internet gateway.
The radio receiver for this must be wall mounted and ebus connected.
The question is, how to I remove or disable the original radio receiver? It looks like it is connected to the PCB via the LCD display. I don't really want a blank hole in the facia.
There is a loop connecting the RT24V terminals on the pcb.

Any advice gratefully received.
 
ChrisB1982 said:
Usually need a blanking plate, think they normally pop out. Any photo?
Click to expand...
Yes, here is a photo. They can pop out from the front? Thank you for the reply.
 

Attachments

  • Reciever.png
    Reciever.png
    2.4 MB · Views: 35
Yes, that would just pop out, it will reveal about 5 metal pins. I think they work without, but unsure if it would interfere with the new one. If you can’t get a blanking plate a cheap time clock 150 would work
 
ChrisB1982 said:
Yes, that would just pop out, it will reveal about 5 metal pins. I think they work without, but unsure if it would interfere with the new one. If you can’t get a blanking plate a cheap time clock 150 would work
Click to expand...
Many thanks. I had a quick google and found the blanking plate. It's now on order (£11). So I just prise it out from the front then? I'll wait until I have the blank though. Thanks again Chris.
 
rgregson23 said:
Many thanks. I had a quick google and found the blanking plate. It's now on order (£11). So I just prise it out from the front then? I'll wait until I have the blank though. Thanks again Chris.
Click to expand...
Yep, make sure it’s the right one though. I’m sure I tried one of the older ones and didn’t fit. Should have mentioned earlier, apologies
 

Similar plumbing topics

G
Vaillant Controls - is it possible to mix wired and wireless?
That is true - however with Vaillant...
Replies
4
Views
849
gndurant
G
J
Recommendations for Vaillant combi heating controls...
OK Stanley 👍
Replies
13
Views
3K
Knappers
K
nick_p
    • Like
Vaillant Ecotec system boiler with VR66 and Opentherm (VR33 and Nest)
Great summary and well done for getting it...
Replies
1
Views
2K
bwel
B
G
Connect HeatMiser UH8 to Vaillant system boiler.
Hi, Did you find a solution as we are also...
Replies
1
Views
2K
Venkat
V
J
Vaillant wireless VRT 392f ebus control modulating advantages?
Vaillant uses 868MHz to connect wireless...
Replies
4
Views
3K
Brambles
B
Back
Top