PEX Crimp ring test | General DIY Plumbing Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

PEX Crimp ring test

Post thread
Post reply

Discuss PEX Crimp ring test in the General DIY Plumbing Forum area at Plumbers Forums

M

myudisc

Messages
1
I'm installing PEX b for the first time, and I was wondering if the Go no go tool needs to fit correctly on all sides of the ring after crimping. I did one fitting and it fits correctly on one side but doesn't fit if I try the other direction. Any insight?
 
Sort by date Sort by votes
In theory it should fit all around but it’s the nature of the beast with crimp rings one part will always be bigger as the material has to go somewhere etc
 
Upvote 0 Downvote

Similar plumbing topics

B
  • Question
Using an AAV for washing machine waste trap
If you go and put your hose in the top like...
Replies
1
Views
353
cjg
C
R
  • Question
MDPE to copper lever valve
I was hoping for a 1/4 turn ball valve type...
Replies
2
Views
2K
robin4648
R
R
Heat Group Magnaclean copy. Parts of it are excellent.
The old adey ones had the same problems the...
Replies
1
Views
1K
ShaunCorbs
ShaunCorbs
S
  • Question
Unidentified noise in party wall
Ok thank you Chuck, yes it does a bit 😆 That's...
Replies
6
Views
570
shrewmouse
S
elvis80
  • Question
New shower mixer - no cold water
Thanks. I think you were right. I took the...
Replies
7
Views
3K
elvis80
elvis80
Back
Top