Inline potable expansion valves | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Inline potable expansion valves

Post thread
Post reply

Discuss Inline potable expansion valves in the Gas Engineers Forum area at Plumbers Forums

M

Matt0029

Gas Engineer
Messages
1,192
Has anyone fit inline expansion valve on the cold water supply to an unvented cylinder. The normal style were you just tee of after the composite valve can leave a dead leg in the pipework? A local water authority has pulled some. Thanks
 
  • Like
Reactions: Dan
Yes flow through valve not cheap around £100 for a 3/4 one
 

Similar plumbing topics

M
  • Question
Composite valves unvented cylinder
I find you get fewer problems if the expansion...
Replies
2
Views
534
Ben-gee
B
I
  • Question
Water hammer/noise from pipework at night?
I would of clipped the pipework but it is...
Replies
2
Views
368
Illuminate
I
C
Expansion vessel for potable water for a combi boiler
I suppose shouldn't be too surprised as water...
Replies
18
Views
4K
John.g
J
T
Hot water is cold. Boiler or valve
Please advise me. I am a disabled pensioner. I...
  • TheCatWhoNeedsaHotShower
  • Boilers
  • 0
  • 480
  • Latest:
  • TheCatWhoNeedsaHotShower
Replies
0
Views
480
TheCatWhoNeedsaHotShower
T
B
  • Question
Reliance inlet control valve 3/4.5 is overflowing
They need to hold there g3 certificate eg...
Replies
4
Views
505
ShaunCorbs
ShaunCorbs
Back
Top