Radiator flex pipes | General DIY Plumbing Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Radiator flex pipes

Post thread
Post reply

Discuss Radiator flex pipes in the General DIY Plumbing Forum area at Plumbers Forums

G

Glasgowman

Messages
80
Could I pull these flex pipes up by cable tying them onto the back of the radiator (it’s a double rad) Just wondering if the heat against the cable ties would be ok. I’ve seen the cable clips you can get but not much room for them. Any help appreciated
 

Attachments

  • IMG_2352.jpeg
    IMG_2352.jpeg
    1.2 MB · Views: 50
Sort by date Sort by votes
You can secure the flex pipes to the back of the radiator using heat-resistant cable ties, which are better suited for the high temperatures radiators generate. Standard ties may become brittle over time from the heat, so look for ties rated for up to 125°C or use metal cable ties for more durability. Just make sure to avoid direct contact with the hottest parts of the radiator to ensure the ties last longer.
 
Upvote 0 Downvote

Similar plumbing topics

M
  • Question
Flushing radiators unit Kamstrup 401
That's I thought. Thanks for quick answer
Replies
2
Views
720
MaoVi89
M
J
  • Question
70s Renovation - Radiator Manifold
No you can’t use an ufh one as they have a...
Replies
3
Views
1K
ShaunCorbs
ShaunCorbs
R
  • Question
Radiator size
No need to work out the output of the existing...
Replies
1
Views
397
ShaunCorbs
ShaunCorbs
N
  • Question
How to replace old 3/4 Radiator valves with 15mm TRV
I have a 3/4" rad system i'm working on. Was...
Replies
9
Views
2K
Daley power
D
V
  • Question
New house, 1 cold radiator, I've run out of ideas, help!
That is great that it was a simpleish fix in...
Replies
6
Views
1K
Lou
Lou
Back
Top