Sentinel x800 | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Sentinel x800

Post thread
Post reply

Discuss Sentinel x800 in the UK Plumbers Forums area at Plumbers Forums

M

Matt0029

Gas Engineer
Messages
1,192
If putting this in a system would it at all help clean a plate heat exchanger if repeatedly turning the hot tap on so the C/H water runs through the plate? I imagine not or everyone would so it instead of taking the plate out.
Thanks
 
Sort by date Sort by votes
On a combi ?

If yes just run on how water only for a good 15-20 mins
 
Upvote 0 Downvote
That’s what baxi do they use fernox can stuff
 
Upvote 0 Downvote
Any idea how they make sure it's going through the plate when put in the filling loop? As running the hot tap will divert the water that is presently in the heat exchanger around the plate. Run heating for a second before. Running the hot tap
 
Upvote 0 Downvote

Similar plumbing topics

S
  • Question
No heating flow. Pump and diverter working, what else could be wrong?
Problem found, it was a blockage... mostly in...
Replies
11
Views
1K
Stupot
S
D
  • Question
Worcester Greenstar 30 Cdi Combi loss of CH & HW -overheating
Thanks
Replies
5
Views
1K
Dave 123
D
W
  • Question
Rayburn 460K Flue temperatures?
Yeah I virtually rebuilt the Rayburn & don’t...
Replies
2
Views
2K
William86
W
G
  • Question
Stopcock Advice
The hot is fed via either a communal cold...
Replies
1
Views
366
ShaunCorbs
ShaunCorbs
F
  • Question
Issue with removing Kitchen tap from ceramic sink
I haven’t used my socket set yet. Purely...
Replies
4
Views
1K
Flookz
F
Back
Top