Search results

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Search results

  1. T

    hot water cylinder

    Is it ok to fit an "indirect" water cylinder in place of a "direct" cylinder ? The reason i ask is we have had "direct" one stolen from a property but have a spare "inderect" one spare.
    • thor2
    • Thread
    • cylinder hot water water water cylinder
    • Replies: 5
    • Forum: Bathroom Advice
  2. T

    Storage tank

    I need to replace a plastic 30 gallon storage tank in a cupboard but due to restrictions I can only get a 25 gallon tank to fit the space,will this affect the flow to the hot water taps? The hot water cyl is directly below the storage tank in the same cupboard,it is a downstairs flat so...
  3. T

    Potterton promax 28

    I have above boiler and it is blowing both internal 2amp fuses, replaced them and it worked for a bit but it has blown the fuses again? any suggestions as what might be the cause. Thanks John
  4. T

    plastic pipe not 15mm

    Got called to water leak today,guy had knocked taps and burst pipe,thought it was standard 15mm plastic pipe however no way 15mm fittings would fit the pipe (too tight)the original fittings on the pipework are all glued fittings,is this a special sized pipework and can you still get...
  5. T

    pressurised water cylinder

    I do maintenance work for a small letting agency and today went to a house wich was complaining about water leaking,when i got there the leak had stopped but the tenant pointed to where the water was coming from and it was the Tundish on the hot water cylinder which was coming out to fast for...
  6. T

    immersion removal

    Is there any tips on removing an old immersion heating element,i have tried soaking in wd40 but have bent 3 bars when using with the large removal socket, just won,t budge.
  7. T

    baxi platinum 33 he

    Got a problem with my Baxi platinum 33 he, boiler works ok but when hot water taps turned on fully get a loud whistling noise from boiler,water temp is fine ,no noise when heating is operating, if i close the hot tap slightly the whistling stops but starts again when open it fully,this happens...
Back
Top