Search results | Page 2

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Search results

  1. H

    Gas Torch

    I've got a gas torch where the flame has gone rather small. Plenty of gas left. It's only a Go Gas one, as I don't do a lot of it I didn't buy an expensive one. I've stripped it down before and got the flame back, but it's gone weedy again. Any ideas? Ta.
  2. H

    Plumbing in towel rail

    Hi guys, after an opinion on what looks good and works well. I have a 1.8 metre towel rail to be fitted in a shower room with a concrete floor. So as the floor is finished I'm bringing my pipes down from upstairs. I was thinking of bringing both pipes to the bottom of the rail, but do you...
  3. H

    Siting unvented cylinder

    Don't worry, someone suitable will actually plumb it. As it's my loft, I've been tasked with siting the tank. Suitable platform has been done. Now, should be obvious, but thought I'd ask for any tips and advice about safely getting the tank through the loft hatch. I thought of a block and...
  4. H

    Isolation valves

    I like the idea of the lever type for pumps, as they don't appear to seize as easily as gate valves, but I've heard they can leak through the middle when isolated. Is there one to go for that has a paricularly good set of inners to make a nice isolator?
  5. H

    Copper to brass

    I've got a 15mm drain off to install to my central heating and all I can find really is a compression tee to fit the drain off, which looks a little chunky. Can I solder the brass drain off into a copper end feed tee, or will I have to settle with the compression tee? Thanks.
  6. H

    Radiator bleed valves

    When I fit my radiator bleed valves, is it best on the flow side, return side or doesn't matter?
  7. H

    Boiler in loft - gas pressure.

    Hello, I plan to have my new boiler fitted in the loft, but I've been told that some people who have done have not had the pressure required in a higher location for the boiler to light. What is the likelyhood of this posing a problem to me? Is this something that is a common issue?
  8. H

    Piping my flow and return

    Hi there, I'm running a new heating system in my house and I want advice on the end of my flow and return. Here's a drawing So, should I link it to maintain flow and return? Link with a balancing valve? Or have the radiator linked and balanced within the flow and return? What really matters...
View older results
Back
Top