Search results | Page 2

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Search results

  1. ShaunCorbs

    An Boiler be left on with water tuned off?

    No that’s fine I guess incase of anything leaks ?
  2. ShaunCorbs

    Texture metal lined pipe?

    Don’t think you can use it with speedfit Don’t know as I use tweetop mlcp
  3. ShaunCorbs

    An Boiler be left on with water tuned off?

    Just turn the programmer to off eg set heating and hot water to off
  4. ShaunCorbs

    Texture metal lined pipe?

    Just mlcp pipe yes used it loads
  5. ShaunCorbs

    Concealed cistern o/flowing any tips what make is it. Pics encl

    Might be a vitra or maybe an old geberit would need to see the flush valve to tell
  6. ShaunCorbs

    An Boiler be left on with water tuned off?

    Combi or heat only eg combi or cylinder?
  7. ShaunCorbs

    Programmable digital cylinder stat

    Couldn’t you run two ?
  8. ShaunCorbs

    What plumbing tape is recommended for a copper waste water pipe

    If it is a condensing boiler the line will need to be replaced back to where it connects to the main stack hope this is cast and not copper I suggest you make access as it could be leaking where you can’t see and causing damage
  9. ShaunCorbs

    Mixer Tap Cartridge change advise.

    Nope it’s not the cartridge It’s the swivel orings tbh it’s a stnd cheap tap best to change it
  10. ShaunCorbs

    Hi, new plumber to the site

    100 posts (non spamming) which is easy to do Then pm me 👍
  11. ShaunCorbs

    Programmable digital cylinder stat

    https://amzn.eu/d/eL5pTvK
  12. ShaunCorbs

    Tape for pipe insulation

    https://www.bes.co.uk/insulation-clips-bag-of-50-10942/ Haven’t used them but worth a try
  13. ShaunCorbs

    Is this bend in a PEX pipe too much?

    I would say too tight best to replace it with an elbow
  14. ShaunCorbs

    Hi, new plumber to the site

    Hello and welcome
  15. ShaunCorbs

    Boiler cycling

    Lack of flow / not enough load eg boiler too big
  16. ShaunCorbs

    Tape for pipe insulation

    Arma flex make sheet insulation and foam tape
  17. ShaunCorbs

    Higher than normal CO on new Grant Install

    If you can might be worth a re check in a week
  18. ShaunCorbs

    Higher than normal CO on new Grant Install

    Was it brand new when you tested it eg hadn’t been run before? Could be manufacturing oils burning off
  19. ShaunCorbs

    Radiator tails weeping

    More ptfe around 24 wraps
  20. ShaunCorbs

    What could be causing this noise in the tundish?

    You sure d2 doesn’t comply with regs tundish to bend minimum 300mm yours looks less than 50mm
Back
Top