Not a Boiler man but I have been to a house where the condensate pipe terminates into a 110mm pipe outside that looks like a drain but on closer inspection is a soak away. my question is, is this within the regulations or just lazy installation?
I have an issue with lack of flow to an upstairs bathroom and wonder if adding an extra feed from the header tank to just above the gate valve would increase flow, I know it will add pressure. I'm also moving the header tank to the highest possible location in the loft as I only have about 300mm...
I have replaced 5 Rads in a clients house all valves are set the same as before and all rads get hot for about 1 to 2 hours and then it cuts off. all rads and the automatic air relief valve are wet indicating no air in the system. pump has been purged.
it is an open system header tank is...
I have a client who has a very tall cylinder and only an immersion heater to heat it, obviously he only gets the top of the cylinder warm as the thermostat shuts the heat off once that part is hot. can I retro fit a external stat to bypass the immersion stat 1/3 from the bottom of the cylinder...
I have just installed a shower pump into an existing system the header tank is in the loft giving about 3m head and the hot cylinder is on the same level as the shower, the hot feed to the pump is up and over passing the header tank in the loft were it has an open vent pipe. there is a pressure...