I have a Vokera Compact A combi boiler. All the clearance distances around it required by the manufacturer for servicing are good. However there is not very much space in front of the access caps/nozzles at the bottom of the flue. I understand that these caps are used when the boiler is serviced...
Hi
I have a condensing boiler recently installed with a small bore pipe taking the condensate into the internal waste drainage.
Does the Valliant boiler have protection in it to stop any back flow from a feed that enters the same condensation pipe? The feed into it will naturally flow away...
I don't want to repeat the whole post but I'm looking for a suitable gas fitter for the boiler fitting with rear flue job I mention in my post in the Gas Safe Register Forum on here. The job is in London - SE26.
I’m drawing up a spec for a new kitchen and this includes a new position for a new combi boiler.
I’m currently thinking of a Vokera Compact A because, using the rear flue, means that it can be sited underneath the worktop (although I need to allow for a moveable hatch in the worktop over)...
Hello
Our combi boiler stopped working on Friday. It may have been because of rain coming in through the flue. It had a new fan fitted 2 years ago.
When turning on from scratch, the pump turns on but there is no attempt to ignite nor does the fan run. This happens regardless of whether I have...
Hi
Our combi boiler has stopped working - I was expecting it to be a new fan required - as this happened 2 years ago due to water coming in through the flue during heavy rain.
One thing I don't understand is that when the boiler is turned on, the pump starts immediately despite the heating not...