Search results

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Search results

  1. Stants

    Connecting Grohe shower using adapters to 15 mm supply

    Hi I've purchased a GROHE | Euphoria 260 Exposed Shower ( looks nice ) however Im missing some initial connecting adapters the installation instructions say it comes with " easy install adapters " and threaded tape ....I have neither of these ,all I have is the " S " unions ... so I did a bit of...
  2. Stants

    Worcester Bosch 27i system boiler on when off on nest stat

    Hi I've just had a Worcester bosch 27i system boiler fitted on an unvented system I'm very happy with it great install but I've just happened to see it was on , so I checked the stat ( nest ) and hot water was not due on and no heating on either I did notice however that although the heating...
    • Stants
    • Thread
    • boiler bosch stat system worcester worcester bosch
    • Replies: 2
    • Forum: Boilers
  3. Stants

    What is the fall for connecting a 40 and 50 mm Drain into a soil pipe

    Hi could anybody tell me or post a link for the correct fall / gradient for a 40 mm and 50 mm drain pipe ( Shower ) connecting into a new soil stack im guessing it would be one in something or degrees Thanks
    • Stants
    • Thread
    • drain pipe soil soil pipe
    • Replies: 6
    • Forum: Boilers
  4. Stants

    GROHE Tempesta Cosmopolitan System 160 Bar Shower, 2 Outlets, Chrome

    Hi I'm just having a new heating system unvented Cylinder system boiler etc. The plumber is going to leave me a hot and cold ( balanced feed ) for the bathroom in the loft ive been looking at a few showers and ive seen a Grohe one that looks ok would this be ok on a pressurised system...
  5. Stants

    Pipework size query for wetroom shower tray

    Hi I'm laying the pipework in for a wetroom showertay The trap is outlet 50 mm so was thinking of running it all in 50 mm so does this sound ok , any problems with syphonage or anything else for that matter 2 mtrs Straight , drops down through soffit , turns left ( swept bend )1.5 mtrs into...
  6. Stants

    Pipework type / design for Unvented Cylinder ( 170 L Megaflo Eco )

    Hi I'm tying / hoping to run a drain for an Unvented indirect cylinder I need to run it now as I want to close in the building ( its in a loft conversion ) I'm having great difficulty getting someone to fit the whole system for me , it was being done by a guy but now he can not do it as...
  7. Stants

    Worcester Bosch 30 Ri or Worcester Combi equivalent size

    Hi I was initially having a Megaflo ( 170 L ) and a Worcester Bosch 30 ( RI System Boiler ) in a loft conversion The guy that was doing the work can no longer do it so I was getting another quote for the same set up and the question came up again " why don't you have a Combi boiler (...
  8. Stants

    Glo worm V ,s Worcester Bosch

    Hi I was having a Worcester bosch Greenstar 30 Ri ERP system boiler installed however its been suggested I changed that to a Glo worm system boiler of similar size basically which is best ?
  9. Stants

    wetroom shower drain

    Hi im installing a wetroom shower tray the trap that comes with it is 50 mm diameter I was going to run in 50 mm waste pipe / Elbows and Tees the under floor in solvent weld , and as it goes outside into the stack in push fit ( for ease of getting into if there is ever a blockage ) trouble is...
  10. Stants

    upgrading / addition of Nest to heating system

    Hi I'm have a new central heating system New boiler / pressurized Cylinder 210 new mdpe main 25 mm its being done soonish ( plumbers busy at the mo ) how much more effort is needed to add a nest system or similar and what is entailed ? do you need new rad valves sensors etc. and could it be...
  11. Stants

    Mains uprating is 32 mm that much better than 25 mm

    Hi sorry if this is a silly question I'm having a new heating system installed ( un vented ) my new mains is due to be installed ( moled ) in 25 mm MDPE , the Water companies going to replace the communication pipe under the lead replacement scheme , however its been suggested to me to...
  12. Stants

    Limescale build up on Cylinder hard water area

    Hi I'm going to have a cylinder replaced because its failing there seems to be a lot of limescale build up i have heard of inhibitors liquid form but also heard you get electronic ones that emit a frequency ? are they hard to fit and do they work Cheers
  13. Stants

    Unvented Water pressure and flow question

    Hi I'm having a new System ( Unvented 210 Evocyl cylinder and Worcester bosch boiler greenstar ) I've got one bathroom, bath ,sink and toilet and a shower and toilet , sink in another I think that's deemed as 1 and a 1/2 bathrooms ive done a flow and pressure test ( details on an earlier post...
  14. Stants

    Trouble draining Heating system

    Hi all I have an old Vented system header tank etc...... ( im very soon replacing the whole lot ) I need to move the header tank so tried to drain down the system and the Tanks not emptying put hose on downstairs Rad to drain, and water came out but I'm pretty sure all I've done is empty...
  15. Stants

    Unvented Cylinder size ? ( Evocyl )

    Hi all I'm having New heating set up installed in a loft conversion the Cylinder ( unvented ) and Boiler are being sited in a cupboard within the loft space ( adjacent to the new stairs ) im a bit tight on space Height and width as I am trying not encroach on the bedroom as much as is possible...
  16. Stants

    Mainsboost for unvented system

    Hi all for a loft conversion I’m renewing my heating system to an unvented one ( new boiler , Mega flo or similar ) all located in the new loft space , I’m on the cusp regarding pressure and flow rate so was going to upgrade mains into house but it was suggested to me to have another tank that...
  17. Stants

    Mains stopcock stuck

    Hi I have a mains stopcock that’s stuck open ( similar as in pic ) it will not turn by hand to close so my plan was this, ive squirted some WD40 into the end where the round part meets the main body I was then going to take handle off and use a spanner to try and move it but before I try this...
  18. Stants

    Ideal Standard running into toilet Bowl cistern-fill-valve-sv81767 ?

    Hi I have an issue ( maybe 2 ) the toilet keeps running into bowl through the internal over flow also its running out the top by the arm on the left ( see pic ) if you lift the arm up it stops coming out of it but continues to trickle into the bowl below I've had a look online and its...
    • Stants
    • Thread
    • ideal running toilet
    • Replies: 25
    • Forum: Boilers
  19. Stants

    Motorised Valve setting manually

    Hi I was hoping my old Central heating would go the distance as I'm in the process of a loft conversion and I am going to upgrade .. alas its packed up , the boiler still fires up but its on for a while then goes off ( this was xmas day by the way ) when I last had it going I had hot water but...
  20. Stants

    Pipe size for unvented cylinder and boiler

    hi I have an issue with running pipes ( the route )for a boiler and and unvented cylinder 1 can you combine bother together ( t one into the other) 2 if so what s the minimum pipe size for both ? As I have to either go over , under or dare I say through a steel .... it's in a loft Con Thanks
    • Stants
    • Thread
    • boiler cylinder pipe size unvented unvented cylinder
    • Replies: 12
    • Forum: Boilers
Back
Top