replacement

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

replacement

  1. F

    Grundfos Alpha1 L 26-65 replacement

    Just had a call out to no central heating and the pump needs replacing tomorrow. It looks like the Alpha1 L has been discontinued as its not listed on Grundfos website and it looks incredibly difficult to get hold of one. Typically their technical help is out of office now until Monday so could...
  2. B

    Mixer tap ring sheared during seal replacement - how remove

    In serious trouble here, was going to replace seals around base of mixer tap spout as it was stiff to rotate. Allen removed ok, but spout very difficult to remove, but working it back and forth got it out. But a part has sheared and is stuck in tap base. How on earth I am going to get this...
  3. J

    Replacement Diverter valve for obsolete tap

    Hi, I have a Bristan Matrix Bath Shower Mixer Tap, the diverter valve has been temperamental for some time and has finally failed with a split rubber washer. The tap is obsolete and spares are no longer available. (I have contacted Bristan.) The bath is built in and access to the tap is not...
  4. A

    Combi Gas Boiler Intermittent Problem - Need to identify replacement part?

    Hi All, Combo Gas Boiler - Immergas Zeus Mini I’m hoping you can maybe help me with an intermittent issue I’m having with my Immergas Zeus Mini Combi Boiler. It works for weeks and then has a sporadic issue with igniting the boiler? I’ve uploaded a video so maybe you can take a Quick Look to...
  5. LeoNYC

    Looking for advice on buying the replacement toilets

    I need to replace the 2 old toilets. I measured the rough in as seen below. Seems that I need to buy the 14 inch rough in toilets (which is hard, because only few models are available at Home Depot and Lowes, since this is a non-standard size). Am I doing it right? Any advice on the model? I...
  6. T

    Toilet flush button cistern replacement

    Hello I’m trying to find a replacement flush button but although the thread looks like a siamp I don’t think it is. I found what I thought was the correct button but it didn’t have a strike bar which should fit in a rectangle hole in the centre of the top thread. I’m wondering if that bit was...
  7. N

    Unidentifiable Tap - Finding a replacement Cartridge - HELP

    Hello there, I'm in n desperate need to find a replacement cartridge for an old tap. It's from a wall mounted faucet in our ensuite bathroom that was last refurbed in 1990. The tap has no ideticificaiton markings, and sadly the cartridge is absolutely knackered. We will be refurbishing this...
  8. F

    screw in direct cistern valve replacement

    Leaking toilet - needs replacement flush valve but existing screws direct into cistern not fixed with nurt and seal. How do I get this type of valve or is the thread size the same as the spigot and nut type so I get one of the latter and dispose of the nut & seal?
  9. A

    help identifying clip on TRV head for replacement

    Hi I want to replace my trv heads on my radiators. However I am trying to find what the current ones are as they seem different to the typical screw on ones. These ones clip on with a spring loaded thumb turn. There is no thread on the inlet fitting to the radiator either. Any idea what I need...
  10. M

    Daryl Shower Head replacement (possibly over 30 years old)

    First of all I have to confess I am not a plumber so please bear with me! I have a Daryl enclosed shower in an ensuite bathroom. It was already installed when I moved into my house in 2006 and was probably around 10 years old even then. The other shower components work fine, but the top shower...
  11. B

    Cartridge replacement

    Hello. Am I correct in thinking that the whole of the brass fitting in the attached image is removed to reveal a cartridge. It's pretty tight. Thanks.
  12. L

    Replacement British Gas TRV head

    Good afternoon, I am after a replacement British Gas TRV head. I have found a direct replacement on Ebay, however they are £39.99 + £3.99 postage. Does anyone know if there is a different TRV head that will work? Kind regards, Laurence
  13. E

    Lockshield replacement advice

    I'm redecorating the front room and have found one of the radiator trv leaking when adjusted, so I have decided to replace the trvs on all three radiators given there age, should I replace the lock shields also?
  14. Luca

    Internal cistern flush valve replacement

    Hello, I have to replace the flush valve and/or the washer but unfortunately it's inside the vanity unit. The only way is removing the toilet. I turned the screw on the cistern pipe to stop the water. I removed all the silicon around the toilet, now I can easily lift up the Front panel but...
  15. L

    Where can I get a replacement toilet seat for a bathstore euro mono back to wall pan

    I need a new seat for a Bathstore Euro mono back to wall white pan e14. The seat was a euro mono sandwich seat white chr hinge Bought in 2007. I know that bathstore went bust and homebase bought the old stock. I’ve searched online and found some replacement seats for the euro, but they don’t...
  16. B

    Shower drain cover replacement

    Please see attached pic. . . . I would like to replace the drain cover in my ensuite shower. Also, I am hoping, if possible, to replace the top part without taking the shower basin out (is that possible)? How / what with?
  17. E

    Water Heater Replacement Questions

    Hello, I have a tank Bradford White 50 gallon gas hot water heater for a 1700 sq ft home with 2 1/2 baths, HOWEVER, I am only one person living there. It was installed in March of 2015 so it is 8 years old. I believe life expectancy for a typical hot water heater is around 10 - 12 years so I...
  18. C

    Grundfos Alpha Pump replacement

    Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The existing pump flows downwards. The manual for the proposed replacement recommends that it should pump upwards. This would involve rearranging the flow &...
  19. B

    MT10RF replacement on greenstar junior24i combi mk3

    The clock timer on the Mt10rf transmitter does not work, but it can be used in day mode to get the heating on. Is Drayton LP10RF a suitable replacement? I guess the receiver from this would need to be used rather than the existing Worcester one?
  20. FRAM777

    REPLACEMENT BLENDING VALVE

    I need to replace a 3/4 or 22mm blending valve on a Telford Trident electric hot water boiler. see attached picture of the original part. Telford asked me 100£ for the part and refused to provide the technical details. I am pretty confident this is not a proprietary part and similar parts...
Back
Top