Heya,
So there's a hissing sound coming from underneath my sink that feeds my washing machine and dishwasher. I initially thought it was a weeping connection or a pinhole in an old pipe, so I turned the water off. The hissing was still there but as soon as I drained what was left in my...
what will cut through whatever is blocking my kitchen sink? I've put sulfuric acid, and then later i put a whole gallon of liquid plumber down it, got a snake to go down to the first bend subfloor, then tried suction. nothing, still not draining.
Hi all,
I have an old school cement laundry sink which is clogged. I unscrewed the pipe underneath to try to clear it, and I was able to get some crud out of there. But it seems the majority of the blockage is higher up, in a section concealed within the cement where the two drains get combined...
There are bad smells that come from my sink drain when I run water.
On inspecting (undoing) the U-bend trap, there is no debris or anything in there. It is a clean run. And I don't think the water is being siphoned out of the U-bend (though I can't be certain) because the sink is used a lot and...
On my kitchen sink (sink and a half) I replaced the traps and bought a pack for the 40mm pipe work underneath, however for the half sink I can’t work out how to connect up to it as the 40mm pipe is horizontal going into the main trap
What fitting would I use to drop down from the half sink, for...
Hi everyone
Need advice !
My corner bathroom sink is leaking from a hole which is located at the bottom of the sink on the side
The water drains as normal and I can't see a leak anywhere else .
Any ideas what could be causing this
I have attached an image
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl.
My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work.
So she wants a new one...Astracast it seems are no more.
The problem is its size.....looked...
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
I removed the old vanity unit in my bathroom, intending to do a makeover. Finished the shower cubicle, and starting on the vanity. I bought a 2nd hand basin with taps, but I find it's far too heavy to mount on the new counter I made.
What I'd like is a plastic basin. I see a few on eeb ay, but...
Can anyone recommend a toilet, sink plunger.
It’s not something I do a lot of, but it will be handy to carry on the van, for when needed.
Don’t want to spend a fortune, yet I don’t want something that breaks after a few uses.
Thanks in advamce
Paul
can i buy a rod for moving the plug up and down on a pop up stopper on its own or do i need to buy the whole thing ? , i mean the rod with the ball swivel fitting thing that conects from the stopper to the rod for moving the plug up and down , if so were can i get one ta .
I am installing a sink in utility room. Washing machine waste already exists and is the verical pipe with the flexib pipe from the machine poked down the top and a with a u bend at the bottow going directly to outside drain. Is it OK to put a tee joint into the verical pipe and join the sink...
My parents have a leak from kitchen sink. My dad removed waste trap and since refitted it leaks, but there wasn’t any kind of seal on it, I got a rubber/plastic gasket that seems
To fit the trap but with it, I can’t get it to screw and lock back on (has lugs so locks after quarter turn. But...
Hi all,
Desperately in need of help. Getting very annoyed with myself
Replaced the click plug in my bathroom for a new Basin Slotted one along with the Thomas Dudley Basin Waste kit
All relatively straightforward to put together but why is it still dripping
I'm using the preexisting metal...
Hello all!
I'm a first time DIY-er and I am taking out a new build crappy vanity unit to replace with a wooden vanity with countertop basin.
I'm at the demolition stage! I've managed to remove the old vanity and I've got a waste pipe in front of me going straight into the ground. I always...
I want to remove my downstairs toilet sink and put a new more compact one on the adjacent wall. However there are two ring drain cocks at the bottom. I want to check that I should replicate the layout rather than just using elbow joints?
Had the plumber replace the pipes less than 2 month from the sink that lead into a cast iron pipe. They also unblocked gunk from the start of the cast iron pipe.
The gunk is in the photo I've attached. The pipe work is also attached(it's disconnected as we cleared the u bend to clear it out)...
Hello. I am planning to build a small half bath in my garage, next to a washing machine, using old showers plumbing. There was a stand-alone shower in the garage which has been removed. Unfortunately the pipes are only 1.5" on that side of the house since there's no bathroom and the house is...
I removed three of these sections to clean and when I put them back together I noticed leaking.
Please can you advise on how to attach them correctly.
Thank you.